Subwoofer amplifier is perfect for even the most demanding sound reinforcement installation and touring applications. This 3-way amp allows you to power your left and right main speakers AND your subwoofers, with no crossover necessary, all from one 2u rack chassis. It easily powers four 8 ohms speakers for the stereo mains and two 8 ohms subwoofers with 450W of power per channel plus a whopping 800W for the subs. A perfect amp for DJ's, traveling bands, or small clubs.
Three-way amp allows you to power left and right main speakers and subwoofers with no crossover necessary, all from one 2U rack chassis
Easily powers four 8 ohms speakers for the stereo mains and two 8? subwoofers with 450W of power per channel
Perfect for DJs, traveling bands, and small clubs
Selectable internal Low Pass Filter can be adjusted from 50Hz to 250Hz to maximize the tight punch of your subs
Filter/Source switch enables the internal low-pass filter and uses the left and right input signals for the subwoofer
Selectable Low-Cut Filter to minimize muddy bass and stage rumble
Balanced XLR and 1/4” TRS inputs; binding post (banana plug) outputs, detent volume controls for each channel
Power On, Signal, Clipping, and Protect LED indicators for each channel
Full safety/reliability features: four variable speed fans for ultimate cooling; noise-free On/Off
Roadworthy, rugged double rack space (2U) housing
115(60Hz) IEC power cord connector and 3AG fuse holder
Maximum Frequency Response (Bandwidth):
50 kHz
Maximum Frequency Response (Bandwidth):
50000 Hz
Minimum Frequency Response (Bandwidth):
10 Hz
Minimum Frequency Response (Bandwidth):
0.01 kHz
Total Harmonic Distortion + Noise (THD+N):
0.04 %
Depth:
17.20 in
Height:
3.50 in
Width:
19 in
Product Weight:
46.20 lbs
Power Output Channel 1 & 2:
300W RMS per side @ 8ohms, 450W RMS per side @ 4ohms