hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
 

LED Flange Mount Controller with 12V Universal Power Supply

Model: 1-40045

  • Power Connector: 12VDC, center-positive, 2.1 mm x 5.5 mm barrel
  • Power LED: ON = 5v board supply is present
  • High/Low Current LED: ON = 700mA maximum LED current, OFF = 350mA maximum LED current
  • RS232 Interface: Connection to PC made via standard RS232 Cable 3400 bps, 8 bit, no parity, one stop bit
  • USB Interface: Connection to PC made via standard USB cable to USB port. Requires installation of FTDI virtual COM port (VCP) driver on PC
Compare
Project List
Product Info
Tech Specs
Related Products
Navitar has developed an improved BrightLight LED controller. Features of the controller include: new functionality of dual current output (350mA/700mA), new box now available with flanges for rack mounting, higher resolution on manual potentiometer control, and 12 volt DC input.
  • Power Connector: 12VDC, center-positive, 2.1 mm x 5.5 mm barrel
  • Power LED: ON = 5v board supply is present
  • High/Low Current LED: ON = 700mA maximum LED current, OFF = 350mA maximum LED current
  • RS232 Interface: Connection to PC made via standard RS232 Cable 3400 bps, 8 bit, no parity, one stop bit
  • USB Interface: Connection to PC made via standard USB cable to USB port. Requires installation of FTDI virtual COM port (VCP) driver on PC
  • Rotary Encoder: Manual LED control – 0.1% resolution
  • LED Connector: 6 pin mini-DIN, Constant-current sink, To enable HIGH/LOW current switch: Pins 3->5 and Pins 4->6, Must be tied together on LED harness
 
 

Suggested Products