The ADA-VMUX is used to transport a large number of analog and digital audio signals and can flexibly both add and drop audio channels on the same board ensuring an optimized fit to need. The product is a two card solution onto a single backplane slot for the Flashlink FR202 frame or Flashcase II. The digital audio signals are transported completely asynchronous and bit transparent. The analogue audio conversion is broadcast quality, providing a dynamic range above 105dBA for any conversion. This ensures optimized audio quality for both analog and digital audio signals.

The product also supports bi-directional audio transport making it well suited for both AES and 4-wire based intercom transport. Its multiplex design is optimized for ensuring minimum latency in the audio network, by adding delay only at ingest point. The board can be ordered with 4 stereo pair inputs, 4 stereo pair outputs or 2 stereo pair inputs + 2 stereo pair outputs. The board supports both optical and electrical networks, and can utilize existing SDI network for transport. The card is easy to use with minimum setup needed and broadcast centric control enabled thru Nevions control panel support. This product can only be used in Flashlink enclosure FR202 and Flashlink II.