Projectors & Accessories : Projectors : Panasonic - PT-MZ10KU

Request

More Information

Find

A Reseller

3LCD Solid Shine Laser Projector

Model: PT-MZ10KU

Part #: PT-MZ10KL

Laser LCD, 10,000 lumens, WUXGA
Compact and lightweight body, designed with ultra-low noise operation
Long lasting laser light source and low-maintenance design provide high brightness and superb image quality

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The PT-MZ10KU is a 3LCD SOLID SHINE Laser Projector designed for fixed installations.

Laser LCD, 10,000 lumens, WUXGA
Compact and lightweight body, designed with ultra-low noise operation
Long lasting laser light source and low-maintenance design provide high brightness and superb image quality

Contrast Ratio : 3,000,000:1 (Full On/Full Off)
Depth : 17.31 in
Height : 7.28 in
Lens : Optional powered zoom lenses
Light Output : 10,000 lm
Light Source : Laser diodes
Power Consumption : TBD
Power Supply : AC 100-240 V, 50/60 Hz
Width : 25.59 in
Filter : Included (Estimated maintenance time: approx. 20,000 hours)
Installation : Ceiling/floor, front/rear, free 360-degree installation
Keystone Correction Range : Vertical: +/-40°, Horizontal: +/-15°
Projector Type : LCD projectors
Operating Environment : Operating temperature: 0–45 °C (32–113 °F)*5; Operating humidity: 10–80 % (no condensation)
Note : 1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [2], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 With legs at shortest position.*4 Average value. May differ depending on the actual unit. *5 Light output is limited at operating temperatures higher than 30 °C (86 °F), and projectors cannot be operated at altitudes higher than 2,700 m (8,858 ft) above sea level.
Product Weight : 49.20 lbs
Brightness Full : 10000 lumens
Cabinet materials : Molded plastic
Operation noise : 35 dB/TBD/TBD (NORMAL/ECO/QUIET) (TBD)
Operating Temperature (Maximum) : 113 F
Operating Temperature (Minimum) : 32 F
Applicable Software : Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
Terminals - HDMI IN : HDMI 19-pin x 1 (Compatible with HDCP, Deep Color)
Dimensions (W x H x D) (inch) : 650 x 185*3 x 440 mm (25 19/32? x 7 9/32?*3 x 17 5/16? ) (Without lens) (Not including protruding parts)
DLP™ chip - Panel size (inch) : 25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
DLP™ chip - Display method : Transparent LCD panel (x 3, R/G/B)
DLP™ chip - Number of Pixels : 2,304,000 (1920 x 1200) pixels x 3 , total of 6,912,000 pixels
Time until light output declines to 50 % : 20,000 hours (NORMAL) / 24,000 hours (ECO)
Screen size [diagonal] (inch) : 1.78–25.4 m (70–1,000 in), 16:10 aspect ratio
Lens shift - Vertical (from center of screen) : TBD
Lens shift - Horizontal (from center of screen) : TBD
Keystone correction range with optional ET-UK20 Upgrade Kit : Vertical: +/-40°, Horizontal: +/-40°
Terminals - SDI IN : BNC x 1: 3G/HD/SD-SDI input
Terminals - DVI-D IN : DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
Terminals - MULTI PROJECTOR SYNC IN : BNC x 1
Terminals - MULTI PROJECTOR SYNC OUT : BNC x 1
Terminals - SERIAL IN : D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals - SERIAL OUT : D-sub 9-pin (male) x 1 for link control
Terminals - REMOTE 1 OUT : M3 stereo mini-jack x 1
Terminals - REMOTE 2 IN : D-sub 9-pin (female) x 1 for external control (parallel)
Terminals - LAN : RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
Terminals - DIGITAL LINK/LAN : RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP, Deep Color)
Terminals - REMOTE 1 IN : M3 x 1 for wired remote control
Terminals - USB : USB Connector (Type A) x 1 (Output 5 V/2 A)
Center-to-corner zone ratio : 0.9
Terminal - RGB In : D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)

Aspect Ratio - 16:10
Number of Imagers - 3-chip
Projector Applications - Corporate
Projector Applications - Education
Projector Technology Type - LCD
Supported Resolution - WUXGA (1920x1200)

266703_PT-MZ10KL_SPEC_FILE_ENGLISH.pdf 1748265 kb - Data Sheet

Project List

265686_mz16k_cat_en.pdf 1109391 kb - Data Sheet

Project List

Find a Reseller

Request Information

Panasonic
Two Riverfront Plaza
Newark, NJ 07102
United States
877.803.8492
http://business.panasonic.com/products-avtechnology

Contact in regards to this product:

Panasonic

Model: PT-MZ10KU

AV-iQ Terms and Conditions

Audio

More Categories

Cameras

More Categories

Cases & Bags

More Categories

Computers

More Categories

Conferencing

Content Management

Control

Displays

Furniture

More Categories

Lighting & Studio

More Categories

Mounts & Rigging

Networking & Cabling

More Categories

Power

Presentation

More Categories

Production

More Categories

Residential

More Categories

Security & Safety

Signal Management

More Categories

3LCD Solid Shine Laser Projector

Model: PT-MZ10KU

Part #: PT-MZ10KL