Pathway’s eDIN Analog-to-DMX Interface converts 24 analog signals or contact closures into DMX. An on-board DMX merger can combine the converted signal with other DMX sources, such as consoles or architectural controllers. Twenty-four preset looks can also be recorded into the card and recalled via contact closure.
Convert 24 Analog 0-10V inputs into DMX
Contact closure input mode
Built in DMX merger permits operation in-line with a console
User-assignable priority (analog over DMX or DMX over analog)
Selectable DMX start address
24 Snapshots with looping capability and “back-up look”
RDM discoverable and configurable
Full RDM reporting of analog levels
Easy to use configuration interface
Pluggable screw terminals for all connections
DMX pass-thru connector
Snap-on DIN rail housing
DIN rail mounting section included
1500V opto-isolation between input and output ports
250V fault protection on input and output ports
Converter Type - Other
ROHS Compliant - Yes
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
14 F
Certifications:
CE
Input Signal Types:
Analog
Output (Converted) Signal Type:
DMX
ROHS Compliant:
Yes
AC Voltage:
250 Volts
DC Voltage:
30 Volts
Height:
1.50 in
Width:
3.60 in
Product Weight:
1.54 lbs
Regulatory Compliance:
ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990), ANSI E1.20 RDM(2010), ANSI E1.3 0-10V Analog Control, CE/FCC, RoHS 2002/95/EC, Class 2 Low Voltage