Signal Processing Systems : AV Input / Output Boards & Cards : Plura Broadcast, Inc. - RUB H1

Module Housing 19 inch 1RU and Housing for 4 Double Card Modules

The RUBIDIUM Series by Plura offers the highest amount of flexibility and comfort with its modular design. From comprehensive redundant systems all the way to affordable single module applications, find the housing design and price that project require.

Series: Rubidium

Model: RUB H1

RUB H1 is part of the RUBIDIUM SERIES 1 modular system which offers flexibility, future proof and longevity.
The RUB H1 is a 1 RU 19” frame which can accommodate up to four modules.
Hot Swappable with rear loading modules.
I/P & O/P connectors are a standard and part of the module.
Uniform front design which offers four status LED’s and cut-outs for 4 keys and an identification button for each module.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

RUB H1 is part of the RUBIDIUM SERIES 1 modular system which offers flexibility, future proof and longevity.
The RUB H1 is a 1 RU 19” frame which can accommodate up to four modules.
Hot Swappable with rear loading modules.
I/P & O/P connectors are a standard and part of the module.
Uniform front design which offers four status LED’s and cut-outs for 4 keys and an identification button for each module.
RUB H1 Frame comes standard with temperature and fan controller module.
The controller status is available over TC_link and the failure relay.
RUB H1 frame can be interconnected (via standard RLC connector) to facilitate data exchange between modules, affordable system expansion and upgrade-ability requirements.
Fail or error signals will be triggered by the failure relay contact at the RLC connection. Contact closure indicates a breakdown or programmed failure occurrence.
RUB H1 housing and each connected module equipped with their own failure relay. These relays are connected in parallel.
Each slot has its own ID address.
Modules can individually be configured (e.g. the time code and video modules), can be located by their addresses.
RUB H1 has a USB connector at the rear of the frame to provide local configuration capability using Plura configuration software.
Each connected module can be configured individually.

Input/Output Board/Card Type - Video
Rackmountable - Yes
TAA Compliant - Yes
Spec Sheet available - Yes

Active Power: 2 Watt
Current Draw: 3 Amps
DC Voltage: 30 Volts
Depth: 6.95 in
Height: 1.75 in
Width: 17.58 in
Product Weight: 4.41 lbs

Housing 1351763 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

1G AV over IP SDM Card

by Aurora Multimedia Corp.

8-slot 2RU DigitalMedia Card Chassis for DM-NVX-C and DMCF Cards

by Crestron Electronics, Inc.

4-Channel Graphics Card with HDMI 2.0 Outputs

by Datapath Ltd.