hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Rane Corporation - ZR1

Remote Control for CP64S and CP52S Commercial Processors

Model: ZR1

  • Connects to the CP52S through a 5-pin Euroblock connector
  • Uses 5 wires with 2 bits for Zone Program selection (active low Gray Code) and volume control
  • A common shield/gnd and two wires for ratiometric DC control of Zone Level
  • Selector logic is active low Gray Code with pull-up provided in the CP. Control may be a simple switch closure to GND or 5 volt TTL
Compare
Project List
Product Info
Tech Specs
Documents
The optional ZR1 wired Remote Control allows Zone Level and Zone Program selection of the CP52S and CP64S from within the zone area. Two ZR1 remotes may be used with each CP64S, one in each zone. Remote control is initiated by engaging the RMT switch (located on the front panel). The ZR1 may be installed in a standard electrical box and finished with a Decora™ plate.
  • Connects to the CP52S through a 5-pin Euroblock connector
  • Uses 5 wires with 2 bits for Zone Program selection (active low Gray Code) and volume control
  • A common shield/gnd and two wires for ratiometric DC control of Zone Level
  • Selector logic is active low Gray Code with pull-up provided in the CP. Control may be a simple switch closure to GND or 5 volt TTL
 
 

Suggested Products

by RDL, Radio Design Labs