Signal Processing Systems : Related Signal Processing Products : RDL, Radio Design Labs - FP-TP4PW

Power Inserter - Twisted Pair - Four Sets of Outputs - Signal Loop-through

The FP-TP4PW is a four output power inserter compatible with RDL twisted pair products. It is powered from a 24 Vdc power supply using either one of the power jacks or the terminal block.

Series:

Model: FP-TP4PW

Power Four Sets of Remote Senders and Receivers from a Convenient Location
24 Vdc Input on dc Power Jack or Full-Size Terminal Block
Power Bus Provides Expansion to Adjacent Power Inserters
Blue Power LED Shows Module is Receiving Power
Green LEDs Indicate Correct dc Output Voltage on RJ45s

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The FP-TP4PW is a four output power inserter compatible with RDL twisted pair products. It is powered from a 24 Vdc power supply using either one of the power jacks or the terminal block. Power jacks are provided at each end of the module to facilitate chaining multiple FP-TP4PWs from a single power supply. Four dual-RJ45 jack sets are provided to connect remote twisted pair senders and receivers. Power is provided to all modules connected to the RJ45 jacks. Signal pairs feed through the associated RJ45s. The voltage feeding each dual-RJ45 jack set is separately protected by an automatically resetting fuse. A power LED is associated with each dual-RJ45 jack set, facilitating identification of wiring faults. Module power is indicated by a front-panel LED.

Power Four Sets of Remote Senders and Receivers from a Convenient Location
24 Vdc Input on dc Power Jack or Full-Size Terminal Block
Power Bus Provides Expansion to Adjacent Power Inserters
Blue Power LED Shows Module is Receiving Power
Green LEDs Indicate Correct dc Output Voltage on RJ45s
Two Associated RJ45s Provided for Each Power Output
One Associated RJ45 may Power Receivers
The Other Associated RJ45 may Power Senders

Outputs (4): Dual-RJ45
Indicators (5): Power In (1); Power Out (4)
Power Connections (3): Power Jack (2); Terminal Block
Power Requirement: 24 Vdc @ 25 mA plus connected loads
Operating Temperature (Maximum): 131 F
Operating Temperature (Minimum): 32 F
Depth: 1.11 in
Height: 3.25 in
Width: 5.65 in
Shipping Weight: 0.80 lbs

D-BT1A - Wall-mounted Bluetooth Audio Format-A Interface

D-TPR1A - Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output

D-TPR2A - Active Two-Pair Receiver - Twisted Pair Format-A - Stereo Phono jack Outputs

D-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs

D-TPS1A - Active Single Pair Sender Twisted Pair Format-A XLR Microphone Input with Phantom

D-TPS2A - Active Two Pair Sender Twisted Pair Format-A Stereo RCA Jack Inputs

D-TPS2AM - Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In

D-TPS3A - Active Three Pair Sender Twisted Pair Format-A XLR Microphone & Stereo RCA In

D-TPSL1A - Active Single Twisted-pair Format-A Sender

D-TPSL2A - Active Two Twisted-pair Format-A Sender

D-TPSM2A - 2-pair Audio Sending Module, White

DB-TPS2AM - Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In

DB-TPSM2A - 2-pair Audio Sending Module, Black

DS-BT1A - LED Status Indication Wall-mounted Bluetooth Audio Format-A Interface

DS-TPR1A - Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output

DS-TPR2A - Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - stereo phono jack outputs

DS-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out

DS-TPS1A - Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic input w phantom

DS-TPS2A - Active Two-Pair Sender - Twisted Pair Format-A - Stainless - stereo phono jack inputs

DS-TPS2AM - Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone & Stereo Mini-jack In

DS-TPS3A - Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic & stereo phono in

DS-TPSM2A - 2-pair Audio Sending Module, Stainless Steel

FP-TPX3A - Format-A Twisted Pair Remote Controlled Mixer

RU-TP4PW - Power Inserter - Twisted Pair - four sets of outputs - signal loop-through

RU-TPDA - Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

RU-TPS4A - Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

TX-TP1PW - Power Inserter

TX-TPR1A - Active Single-Pair Receiver

TX-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs

TX-TPR6A - Passive Single-Pair Receiver, Twisted Pair Format-A

TX-TPS1A - Active Single-Pair Sender, Twisted Pair Format-A

TX-TPS3A - Active Three-Pair Sender, Twisted Pair Format-A

TX-TPS6A - Passive Single-Pair Sender, Twisted Pair Format-A

Datasheet for Power Inserter - Twisted Pair 250649 kb - Other

Project List

Find a Dealer

Find a Distributor