The R&S CLG cable load generator is a multichannel signal generator for cable TV signals. It is the world's first instrument to simulate cable TV networks with full channel loading. The R&S CLG generates both digital and analog TV signals. These signals can be freely combined, allowing users to simulate any conceivable channel loading scenario in the lab.
Up to 158 channels for US cable TV
Up to 119 channels for European cable TV
More than 53dBc CNR and 60dBc CSO/CTB
High MER of typical 40dB
Full simulation of cable TV networks
Any combination of digital and analog modulations
American and European channel spacing
Simulation of AC hum as superimposed amplitude modulation
External transport stream feeding for digital channels via IP
Internal test pattern generation
Generation of CW signals for CSO/CTB measurements
Easy configuration of complex test scenarios
Separate level and frequency settings for each channel
Setting of tilt across all channels
Easy operation on a PC via a web GUI
Remote control using SCPI or SNMP
Memory space for over 100 user-defined instrument setups
Spec Sheet available - Yes
Frequency setting range:
47 to 1002 MHz step size 1Hz
Output Power:
25 to 60 dBmV
Accuracy (at maximum output level and attenuator set to 0dB):
< / = ±1 dB
Step size per channel:
0.1 dB
Signal-to-noise ratio f < / = 600MHz:
> 53 and 51 dBc
Tilt of output spectrum across entire frequency range:
0 to ±18 dB
AC hum simulation - Amplitude:
0 to 6 %
AC hum simulation - step size 0.1:
%
AC hum frequency - setting range:
47 to 63 Hz
AC hum frequency - step size:
0.1 Hz
Interfaces - RF output:
F connector, 75 ohms
Interfaces - Transport stream input 10GigE:
10GBase-CX4
Interfaces - Control interface Ethernet:
10/100Base-T
Interfaces - 10MHz reference input:
BNC, 50 ohms
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Depth:
11 in
Height:
1.75 in
Width:
19 in
Product Weight:
7.05 lbs
SFC
- Compact Modulator for TV and Audio Broadcasting