55" Ultra-Narrow Bezel 4 display video wall

Model: UN552-TMX4P

Bundled solution with everything required for a 2x2 video wall makes configuration and installation easy
Pull-out mount allows for full-service capabilities and 6-axis adjustment for perfect alignment
S-IPS panel technology allows for excellent off-angle viewing and less color shift compared to other technologies
Auto ID feature reduces install time in the single press of a button
Expanded daisy chain options with UHD passthrough via DisplayPort enables UHD resolution across the entire wall

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

NEC's complete 55" 2x2 LCD TileMatrix™ Digital Video Wall Solution delivers an all-in-one, easy-to-configure and cost-effective solution that is ideal for dynamic digital signage, information display and command & control applications. Exclusive TileMatrix, TileComp™ and FrameComp technologies, combined with the new glass-to-edge design of the NEC UN551S and the full adjustment capabilities of the Peerless DS-VW775 mounting system, provide for a near seamless video wall without the need for additional third-party equipment. NEC provides everything besides the source to complete your video wall solution!

Bundled solution with everything required for a 2x2 video wall makes configuration and installation easy
Pull-out mount allows for full-service capabilities and 6-axis adjustment for perfect alignment
S-IPS panel technology allows for excellent off-angle viewing and less color shift compared to other technologies
Auto ID feature reduces install time in the single press of a button
Expanded daisy chain options with UHD passthrough via DisplayPort enables UHD resolution across the entire wall
Display wall calibration kit, Overframe Bezel Kit and IR/Human sensor complete the solution
Overnight onsite exchange warranty ensures minimum downtime for maximum impact
Input Switching Speed minimizes downtime between source transitions
Human Sensor Accessory ensures digital signage is directed at a targeted audience
Near field communication capabilities for setup and service
Video daisy chain limitations apply when High-bandwidth Digital Content Protection (HDCP) is utilized

Aspect Ratio - 16:9
Display Applications - Corporate
Display Applications - Digital Signage
Display Applications - Government
Display Applications - Retail
Display Color Capability - Color
Display Type - LED
Supported Resolution - 1080p (1920x1080)
VESA Mount Size - 400x400 mm
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Display Size: 55 in
Display Size: 4.58 ft
Brightness (candela): 700 cd/m2
Contrast Ratio: 1200
Depth: 4.10 in
Height: 27 in
Shipping Depth (with packaging): 12.50 in
Shipping Height (with packaging): 34.40 in
Shipping Width (with packaging): 56.50 in
Width: 47.80 in
Shipping Weight: 83.80 lbs
Warranty (Length/Type): 3 years
Display:
Panel Technology: S-IPS
Viewable Image Size: 55 "
Pixel Pitch: 0.5 mm
Pixels Per Inch: 45 @ native resolution
Backlight Type: LED Direct-lit
Viewing Angle (typical): 178° Vert., 178° Hor. (89U/89D/89L/89R) @ CR>10
Response Time (Gray to Gray): 8 ms
Refresh Rate: 60Hz
Active Screen Area: 47.62 x 26.79 in. / 1209.6 x 680.4mm
Orientation: Landscape/Portrait
Displayable Colors: More than 1.07 billion
Synchronization Range:
Horizontal (Analog/Digital): Analog: 15.625/15.734/~31.5-~91.1 kHz, Digital: ~25.0 - ~91.1-~134.0KHz
Input Signal:
Video: Analog RGB 0.7 Vp-p/75 Ohms , Digital TMDS / DisplayPort
Sync: Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
Calibration:
Factory Calibration: Yes
Sensor Calibration (through USB): Yes, External
Calibration with Software: NEC Display Wall Calibrator (KT-LFD-CC2)
Calibration Software: NEC Display Wall Calibrator (KT-LFD-CC2)
Signal Compatibility/Connectivity:
PC Signal Compatibility: Yes
Macintosh Signal Compatibility: Yes
Video: Analog RGB 0.7 Vp-p/75 Ohms , Digital TMDS / DisplayPort
Sync: Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
Input Terminals:
Analog: VGA 15-pin D-sub
Digital: DisplayPort 1.1/1.2 x2, HDMI 1.4/2.0 x2, DVI-D
Audio: Audio Mini-Jack x2, DisplayPort Audio, HDMI Audio
External Control: RS-232C, LAN (100Mb), 3.5mm Mini-Jack (IR Remote)
Data: microSD (Media Player), USB 2.0 (Media Player, USB (Service), USB Type-B (Upstream), USB x 2 (Both for Compute Module, 1 x 5V/2A Powered)
Output Terminals
Digital:DisplayPort (Output DisplayPort1 and OPTION (DP)), HDMI (Outputs HDMI1, DVI and OPTION (TMDS))Audio:3.5mm Mini-Jack, External Speaker Jack (2)External Control:LAN (100Mb)
Additional Features:
Advanced thermal capabilities
Ethernet Control and Communication
RS-232 Control and Communication
Landscape/portrait capable
Carbon footprint meter
SpectraView Engine Capabilities
Scheduler (w/ Real-Time Clock and Holiday mode)
Self Calibration to external color sensor
White Copy Function
Screen saver function
4K UHD Daisy Chain capabilities
Optional human sensor
Intelligent Wireless Data (Near Field Communications)
Raspberry Pi Compute Module Slot
Expanded daisy chain (DP 1.2/HDMI 2.0)
6-axis color adjustment
Metal rear cabinet
Handles
Variable picture modes
Advanced video settings (Noise Reduction, Adaptive Contrast)
Input labeling
Backlight adjust
Frame Comp Capabilities
Internal Media Player via microSD or USB
HDR Emulation
Aspect ratio control
LED direct-lit backlighting
OPS/Expansion slot

UN552_UN552V_UserManual_English.pdf 17607157 kb - Instructions

Project List

UN552-UN552V-SpecBrochure.pdf 1184837 kb - Data Sheet

Project List

KT-55UN-OF5
Overframe Bezel Kit for UN551S and UN551VS Display

KT-RC3
Human Sensor Accessory

Find a Dealer

Find a Distributor