hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
Somfy Systems Inc. - 1822440
Somfy Systems Inc. - 1822440 Somfy Systems Inc. - 1822440 Somfy Systems Inc. - 1822440 Somfy Systems Inc. - 1822440 Somfy Systems Inc. - 1822440 Somfy Systems Inc. - 1822440
Request Quote
somfy-systems

Bus and Sensor Station Power Supply

Model: 1822440

  • Powering a bus using pass-through data:
  • Incoming Somfy Digital Network™ (SDN) data will be joined with the power output from the Bus Power Supply and routed to the output port.
  • Function could be used in riser-based systems where the input is likely coming from a repeater.
  • Powering a bus without pass-through data:
  • Power the 120V AC connection using an approved outlet.
Compare
Project List
Product Info
Tech Specs
Documents

The Somfy Bus and Sensor Station Power Supply provides 24V DC power to the SDN bus. Each Power Supply can provide power to up to 80 bus line devices (excluding motors).

  • Powering a bus using pass-through data:
  • Incoming Somfy Digital Network™ (SDN) data will be joined with the power output from the Bus Power Supply and routed to the output port.
  • Function could be used in riser-based systems where the input is likely coming from a repeater.
  • Powering a bus without pass-through data:
  • Power the 120V AC connection using an approved outlet.
  • Connect a bus line directly to the output port of the Bus Power Supply.
  • Sends power out to a bus segment and is used when bus distribution is designed in one centralized location.
  • Power and data distribution for animeo IP sensors:
  • Power the animeo IP Compact Sensor or Sensor Station by connecting the Building or Sub Controller sensor bus output to the Bus Power Supply pass-through input.
  • Then connect the Compact Sensor or Sensor Station’s outdoor sensor box to the Bus Power Supply Power /Data output.
  • One power supply is required per Sensor Station or Compact Sensor in all animeo IP systems.
  • Use during system configuration:
  • The Power Supply can be used as a tool for temporary power while configuring SDN systems.
  • Connect a USB to RS485 adapter (#9015260) to the SDN data pass-through input and the device to be programmed to the SDN Power/Data output.
  • Allow signals from the programming device to appear in the system configuration.
 
Request Quote