Joystick-type Remote Control Panel for HDC/HSC/HXC Series Cameras. 5 Units in 19" EIA Rack

Model: RCP3100

Many direct access switches suitable for various camera operations - This remote control panel is provided with the control functions required to perform various camera operations. The operation buttons, adjustment knobs, and other controls are arranged o
Higher efficiency of rack mounting allocation, thanks to slim body design - It is just 3.15" (80 mm) wide, which allows you to mount up to five units in a 19-inch EIA rack
Customizable switch and menu - Users can assign many paint functions to the assignable switches in addition to the direct push buttons for quick access to the camera/CCU/BPU
LAN connection capability - It is possible to connect either by LAN cable or CCA-5 cable. Therefore, when setting up a multi-camera control system, it can be built either using the CNU-700 or using a LAN
Building of a variety of control systems - HDC/HSC/HXC/BRC users can build a multi-camera control system using the CNU-700. In a system that uses CNU-700s, two CNUs can be allocated to control a camera system of up to 24 cameras

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The RCP-3100 is a remote control panel for Sony system cameras, which has a variety of settings for the multifunctional operations while having a slim body that is just 3.15" (80 mm) wide, which allows you to mount up to five units in a 19-inch EIA rack. The iris and master black adjustment block use joystick-type control.

Many direct access switches suitable for various camera operations - This remote control panel is provided with the control functions required to perform various camera operations. The operation buttons, adjustment knobs, and other controls are arranged o
Higher efficiency of rack mounting allocation, thanks to slim body design - It is just 3.15" (80 mm) wide, which allows you to mount up to five units in a 19-inch EIA rack
Customizable switch and menu - Users can assign many paint functions to the assignable switches in addition to the direct push buttons for quick access to the camera/CCU/BPU
LAN connection capability - It is possible to connect either by LAN cable or CCA-5 cable. Therefore, when setting up a multi-camera control system, it can be built either using the CNU-700 or using a LAN
Building of a variety of control systems - HDC/HSC/HXC/BRC users can build a multi-camera control system using the CNU-700. In a system that uses CNU-700s, two CNUs can be allocated to control a camera system of up to 24 cameras

Systems Controlled - Other
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Active Power: 48 Watt
Depth: 5 in
Height: 12.20 in
Width: 3.15 in
Product Weight: 3.09 lbs
Power Supply: DC 10.5 to 30V, PoE (IEEE802.3af Class2)
LAN: RJ-45 8pin (x1), 10BASE-T, 100BASE-TX, 1000BASE-T
CCU/CNU: Multi-connector 8pin, female (x1)
EXT I/O: D-Sub 9-pin, female (x1)

BRCH900 - 1/2-inch HD 3CMOS P/T/Z Video Camera

BRCX400 - IP 4K Pan-Tilt-Zoom Camera with NDI HX Capability

BRCX400/W - IP 4K Pan-Tilt-Zoom Camera with NDI HX Capability

HDC3100 - CMOS Sensors Portable System Camera for Fiber Operation

HDC3170 - Three 2/3" CMOS Sensors Portable System Camera for Triax Operation

HDC3500 - 4K CMOS Sensors Portable System Camera for Fiber Operation

HDC4800 - 4K Ultra Slow-motion Camera

HDCP50 - 4K/HD Compact POV System Camera

Control Panel 203970 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor