hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Residential
Security & Safety
Signal Management
Search by Manufacturer
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
#
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Sound Enhancement Products, Inc. - HE-2
Request
Quote
Find
A Dealer

2-channel Hum Eliminator with 1/4inch Smart Jacks

Model: HE-2

  • Eliminate AC hum / 60Hz buzz and noise
  • Breaks ground loops safely while leaving all signal grounds intact
  • Completely passive design (requires no power)
  • Converts automatically between balanced and unbalanced lines
  • 1/4" TRS "smart"jacks(tip,ring,sleeve) inputs and outputs
Compare
Project List
Product Info
Tech Specs
Documents
Hum Eliminator products use our custom isolation transformers to break loop antenna that causes ground hum and buzz. The Hum Eliminator also converts back and forth between balanced and unbalanced connections and prevents the cable from acting as an antenna for noise. Simply place a channel of the Hum Eliminator on the cable connections between the two offending pieces of equipment. Will not affect the quality of the audio, it will improve it. We use 1/4" smart jacks that accept any combination of unbalanced (TS) or balanced (TRS) plugs. These are passive devices (no power required), in cold rolled steel housings, hand-soldered circuit boards and top quality components and hardware.
  • Eliminate AC hum / 60Hz buzz and noise
  • Breaks ground loops safely while leaving all signal grounds intact
  • Completely passive design (requires no power)
  • Converts automatically between balanced and unbalanced lines
  • 1/4" TRS "smart"jacks(tip,ring,sleeve) inputs and outputs
  • Automatically translates signal voltages to match difference in ground potential
  • Frequency response 20Hz to 70kHz +/-0.5dB
  • Distortion less than 0.005% THD @ 1kHz
  • Crosstalk better than -97dB
  • Maximum source impedance 1kOhm. Minimum load impedance 10kOhm
  • Solid cold rolled steel casing
  • Made in the USA
 
Request Quote
 

Suggested Products