Use the Connect30 Cart to store, transport, and charge up to 30 tablets, Chromebooks or notebooks. A current-sensing PowerProdigy™ charging system is available if current requirements exceed 10 amps. Flexible dividers protect the devices. The overhead wire management aids the wiring integration and allows the charging plugs to hang in front of each device. The cart’s compact footprint and top handles provide easy mobility. The Connect30 Cart is made with heavy-gauge steel for security and powder-coated for a durable, long-lasting finish. Locking door and panel increase security of the notebooks.
Stores, charges, and transports up to 30 devices (most tablets, Chromebooks, or notebooks up to 14” diagonal)
1.349”W x 15.675”D x 11.2875”H storage bay
Small cart footprint (26”W x 24”D) saves valuable space
Durable ABS plastic dividers protect devices from scratching (dividers are removable to provide storage space for thicker devices)
Single keyed locks and heavy-gauge steel door and panel provide security
Integrated padlock holes in the hinged door and side panel provide an additional level of security and the ability to use your padlock of choice (not included), or secure the unit to a wall
Devices and students are separated from AC line voltage
Superior, all-metal overhead cord management system keeps charge cords organized above each storage bay
Available with power switch which provides continuous power to all four 10-outlet power units
Three horizontally adjustable, 10-outlet, (125V~/12A, 60Hz) universal power units work with both inline, and wall adapters
External power switch provides easy-access for safe power connection / disconnection
2 aux outlets (always on) for teacher laptop, WiFi access point, or other accessory (1 external, 1 internal)
Optional large removable QuickBrick™ wiring trays with retaining straps for inline charge adapters allow wiring to be completed outside the cart at the comfort of a workstation or desk to provide quick and easy integration
Ventilated door and side panels keep devices and chargers cool, preventing overheating, and extending device life
Replaceable, IEC (quick-release) 15’ nominal 14 AWG, 3-wire power cord and external cord wrap brackets provide easy power access
Four inboard 3” twin-wheel plate casters (two locking) provide easy rolling (rated for 165 lb each)(TW)
Inset handles in top panel provide control and maneuverability
Cart ships fully-assembled for quick, simple integration and deployment
Durable powder coated steel chassis provides a long-lasting finish
ETL recognized (certified to UL 60950-1) in the US and Canada for the cart and electrical system
SCS Indoor Advantage Certified; meets or exceeds applicable ANSI-BIFMA test standards
Warranted to be free of all defects in materials and workmanship for 10 years, electrical system 2 years
Assembled in Chippewa Falls, WI, USA
Cart Type - Other
Casters (Mobile) - Yes
Locking - Yes
Warranty - Yes
Depth:
15.68 in
Height:
11.29 in
Width:
1.35 in
AC Voltage:
125 Volts
Electrical:
(3) 10-outlet power units (outlets rotated 90°)
125V~/12A, 60Hz
15-amp breaker
IEC quick-release (replaceable) 15’ nominal, 14 AWG, 3-wire power cord
Locking power-side panel isolates and separates electrical line voltage from students
ETL recognized (certified to 60950-1)
DC Voltage:
12 Volts
Warranty (Length/Type):
10 years, electrical system 2 years
Certifications:
UL
Power Switch (non current-sensing):
Low-profile, 16-gauge steel enclosure
125V~/12A, 60Hz
Externally-accessible 20A power switch
Four continuous power unit-dedicated outlets (labeled A, B, C, D) (up to 10A power output)
Two auxiliary outlets (1 external, 1 internal) 1A each (controlled by main on/off switch)
IEC quick-release (replaceable) 15’ nominal, 14 AWG, 3-wire power cord
ETL recognized (certified to 60950-1)
PowerProdigy™ Charger:
Low-profile, 16-gauge steel enclosure
125V/12A, 60Hz
Externally-accessible 15A on/off switch
Smart charging senses current and distributes power to the power units requiring it most
Four timed power unit-dedicated outlets (labeled A, B, C, D) controlled by logic board (up to 10A power output)
Cycling interval 15 min
Four LED lights indicate charging activity status of each power unit
Two auxiliary outlets (1 external, 1 internal) 1A each (controlled by main on/off switch)
IEC quick-release (replaceable) 15’ nominal, 14 AWG, 3-wire power cord