Fiber Optic Systems : Fiber Optic Extenders : Thinklogical, A Belden Brand - Camera Fiber-Link 4000

Camera Fiber Link 4000 Extender with Full/Medium/Base Configuration

Series: CFL

Model: Camera Fiber-Link 4000

Supports all Camera-Link™ full/medium/base con"gurations with pixel clocks from 20 to 85MHz
Extend camera signals up to: 350 meters using standard multi-mode fiber, 1000 meters using eSX+ fiber, 10 kilometers using single-mode fiber
Transparent Camera-Link™ operation
Small form factor, units are self-contained and do not require user adjustments
Signal transmission via fiber optic cable no RF interference

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

System consists of a camera side unit and a frame grabber side unit (both units are similar in appearance, but are labeled differently). Each extender supports the camera signals, as well as serial connections (both the SerTFG and SerTC within the MDR cable, and three pairs of RS-232 lines). The CFL-4000 supports full/medium/base configurations and requires three fibers. The CFL-4000 is available with SC, ST, or LC-type fiber connectors for multi-mode fiber extension and SC/APC for single-mode fiber extension.

Supports all Camera-Link™ full/medium/base con"gurations with pixel clocks from 20 to 85MHz
Extend camera signals up to: 350 meters using standard multi-mode fiber, 1000 meters using eSX+ fiber, 10 kilometers using single-mode fiber
Transparent Camera-Link™ operation
Small form factor, units are self-contained and do not require user adjustments
Signal transmission via fiber optic cable no RF interference
Serial Port (RJ45) with RS232 interface
Class 1 laser product
Industrial options also include power input: 5 to 12V or 12 to 24V, Screw lock (threaded) power connector, use of users own DC input, din rail connectors for mounting, chassis ground post

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Warranty - Yes
Spec Sheet available - Yes

Pixel Clock: 20 to 85 MHz
Humidity: 5 to 95 % (RH, non-condensing)
Power Consumption: <10 W (per unit)
DC Adapter: AC/DC adapter universal
Camera Side Video: MDR-26 (2)
Camera Side Serial: RJ45
Camera Side Power: 2.5mm connector
Camera Side Fiber Connectors: SC, ST, or LC (3)
Frame Grabber Side Video: MDR-26 (1)
Frame Grabber Side Serial: RJ45
Frame Grabber Side Power: 2.5mm connector
Frame Grabber Side Fiber Connectors: SC, ST, or LC (3)
Cables Included: MDR-26 Camera-Link™ Cable, 2 meters (2), KIT-000013-R which contains: DB9 Male to RJ45 Female Adaptor (1), DB9 Female to RJ45 Female Adaptor (1), CAT 5 Cable, 3 meters (2)
Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
DC Voltage: 5 Volts
Depth: 5.44 in
Height: 1.25 in
Width: 6.88 in
Product Weight: 1 lbs
Shipping Weight: 6 lbs
Warranty (Length/Type): 12 months
Operating Distance (Multimode): 1148.29 ft
Operating Distance (Singlemode): 32808.40 ft

Camera Fiber-Link 3000 - Camera Fiber Link 3000 Extender with Camera Side TX and Frame Grabber Side RX

Camera Fiber-Link 5000 - Camera Fiber Link 5000 Extender with Camera-Link Camera Configuration

Camera Fiber-Link 6000 - Dual Camera Fiber Link Frame Grabber Extender

Camera Fiber-link 3720 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

3GSDI Extender via One LC Singlemode or Multimode Fiber Optic Cable

by Network Technologies Inc (NTI)

Multimode Fiber cable extenders supporting DVI signals

by Lightware

UBEX MMU-X200 upgrading to not limited from the highest limitation level

by Lightware