CFL-6000 Dual Camera Fiber-Link™ frame grabber is a unique component that addresses users who have two cameras in different locations and are tight on space. The CFL-6000 frame grabber side Unit (RX) receives optical data from two CFL-3000 camera side units (TX - two CFL-3000 TXs, sold separately) and converts them back into video data and sends them out to the CLF-6000 frame grabber base. The CFL-6000 RX and the two CFL-3000 TXs are interconnected using multi-mode or single-mode fiber optic cable, allowing Camera-Link™ video support up to 10 kilometers from the host computer. Each extender supports the camera signals, as well as serial connections (both the SerTFG and SerTC within the MDR cable, and three pairs of RS-232 lines (Note: RS232 signals are broadcast from the PC to both CFL-3000 units, but RS232 signals to the PC can only be sent from Camera 1 Extender).
Supports two independent Camera-Link™ base configurations with pixel clocks from 20-85MHz
Extend camera signals up to: 350 meters using standard multi-mode fiber, 1000 meters using eSX+ fiber, 10 kilometers using single-mode fiber
Transparent Camera-Link™ operation
Small form factor, units are self-contained and do not require user adjustments
Signal transmission via fiber optic cable no RF interference
Serial Port (RJ45) with RS232 interface
Class 1 laser product
Industrial Options also include: power input: 5 to 12V or 12 to 24V, screw lock (threaded) power connector, use of users own DC input, din rail connectors for mounting, chassis ground post
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
32 F
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
DC Voltage:
5 Volts
Depth:
5.44 in
Height:
1.19 in
Width:
9 in
Product Weight:
1 lbs
Shipping Weight:
6 lbs
Warranty (Length/Type):
12 months
Video:
MDR-26 (2)
Serial:
RJ45
Power:
2.5mm connector
Pixel Clock:
20 to 85 MHz
Humidity:
5 to 95 % (RH, non-condensing)
Power Consumption:
<10 W (per unit)
DC Adapter:
AC/DC adapter universal
Cables Included:
MDR-26 Camera-Link™ Cable, 2 meters (4), KIT-000016-R which contains: DB9 Male to RJ45 Female Adaptor (1), DB9 Female to RJ45 Female Adaptor (2), CAT 5 Cable, 3 meters (3)
Operating Distance (Multimode):
1148.29 ft
Number of Connectors:
4
CFL-000M06-LCRX
- Camera Fiber Link 6000 Extender, High Speed Dual Base, Frame Grabber Side, Multi-mode, LC
CFL-000M06-STRX
- Camera Fiber Link 6000 Extender, High Speed Dual Base, Frame Grabber Side, Multi-mode, ST
CFL-000S06-SCRX
- Camera Fiber Link 6000 Extender, High Speed Dual Base, Frame Grabber Side, Single-mode, SC/APC