SDVoE Encoder and Decoder

Model: VuStream 550

Distribute 4K60 4:4:4 digital video over standard 10G networks
SDVoE™ encoder/decoder with no latency
128-bit AES encryption
Compact and fanless design with encoding & decoding, fiber & copper in one device
Power over Ethernet (PoE 802.3at)

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The VuStream 550 is a compact all-in-one SDVoE encoder/decoder appliance, for fiber or copper infrastructures. It is designed for distributing 4K60 video and audio over standard 10Gb IP network switches with no latency. The VuStream 550 provides an ultra-scalable, easy to deploy, highly reliable solution for incredible flexibility in system design and workflows.

Distribute 4K60 4:4:4 digital video over standard 10G networks
SDVoE™ encoder/decoder with no latency
128-bit AES encryption
Compact and fanless design with encoding & decoding, fiber & copper in one device
Power over Ethernet (PoE 802.3at)
SFP plug connection for fiber, bi-directional IR, RS-232, and Ethernet extension.
HDMI with HDCP 2.2 support
Supports Wall Mode, Multiview Mode
Support for USB routing
Compatible with the TRx centralized management software to configure and manage appliances
PERFORMANCE ENCODING - Secure, low-latency, high-quality UHD video streams
SINGLE APPLIANCE - Encoding & decoding, copper & fiber capabilities in a single appliance.
ADVANCED SW FEATURES - Supports Wall Mode, Multiview Mode, USB Routing, and much more!
CENTRAL MANAGEMENT - Single common configuration & operation platform
SDVoE Technology - SDVoE is a standardized technology utilizing Ethernet to transport audio and video signals in professional AV environments bringing customers high-performance, zero-latency, software-based AV-over-IP platform.
Centralized Management - Configure and operate all your VuStream encoders, decoders, and even your VuScape controller with TRx – a single, common management platform.

Warranty - Yes
Spec Sheet available - Yes

AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 18 Watt
DC Voltage: 12 Volts
Depth: 4.22 in
Height: 1.58 in
Width: 0.29 in
Product Weight: 1.40 lbs
Color: Black
Warranty (Length/Type): 3 Years
Ethernet Network: 1x 10Gb/s LAN with RJ45 and PoE (802.3at) bi-directional port
Fiber Network: 1x SFP+ 10GB/s (SFP+ plug not included) bi-directional port
Transmission Distance: Over CAT6a up to 100m or up to 300m over Multimode Fiber or 30Km over Single Mode Fiber
Chassis: Compact and fanless chassis
Video Input: 1 x HDMI (type A)
Video Output: 1 x HDMI (type A) Used also as Loopthrough in Encoder Mode
Video Format: YUV 4:4:4 including HDR
Max. Capture Resolution: 4096x2160 at 60HZ
HDCP Compliance: HDCP 2.2
Audio Inputs (Digital): HDMI, LPCM 2.0/5.1/7.1
Audio Inputs (Analog): Analog (3.5mm)
I/O Ports: 1 Ethernet (RJ-45), 1 RS-232 (3-pin terminal block), 1x USB (miniUSB), 1x USB (Type B), 2x USB 2.0 (Type A)
USB / KVM: Through USB 2.0 (HID capable)
STREAMING PROTOCOL: SDVoE (IP streaming over 10G network with no latency)
Compression: Uncompressed up to 10Gb/s on higher data rates minimal lossless compression ratio
Encryption: End-to-end AES 128bit encryption
Modes: The device can be used as an encoder or decoder (configurable) and in fiber or copper mode (configurable)
Scaling and Cropping: Upscaling, downscaling, cropping, and auto-scaling for seamless switching and fixed resolutions
Basic Configuration: Configuration via DIP switches on appliance
IP Matrix Mode: Switch any source from an encoder to a decoder
IP Video Wall Mode: Create video walls and simultaneously display multiple sources or stretched sources over video walls
IP Multiview Mode: Simultaneously display multiple sources through a single decoder
Configuration/API: TRx Software, REST-API

Encoder/Decoder 4368503 kb - Data Sheet

Project List

Find a Dealer