hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Residential
Security & Safety
Signal Management
Search by Manufacturer
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
#
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Wheatstone Corporation - E-6
Request
Quote
Find
A Dealer

Compact Control Surface Console

Series: E

Model: E-6

  • Touchpad for control of functions on the VGA monitor
  • Dynamics, EQ, high- and low-pass filtering on every fader
  • No running PC required
  • 4 mix output busses
  • 4 mix-minus busses
Compare
Project List
Product Info
Tech Specs
Documents
E-Series E-6 is a console control surface that interfaces with Wheatstone’s WheatNet-IP networking and routing system via a single CAT6 cable. No audio is routed or mixed in the surface itself. As a networked system, the console can access any source in your entire complex, sharing remote codecs or bringing up another studio’s program bus on the console. A user-supplied high-resolution graphic display monitor can provide vivid VU and peak level indication, as well as in-depth control and programming of the console.

The E-6 control surface embodies a robust feature set for complex on-air or production application to bring maximum control to minimum space with exceptionally intuitive operation. A touchpad and VGA monitor allow you complete access to an incredibly rich range of features.

In addition to standard features such as 4 stereo mix buses, 4 mix-minus buses, 4 AUX buses and 8 character fader displays, the E-6 offers bus-minus on all faders with talkback, optional EQ/Dynamics on every channel (and with user recall for talent EQ settings), split headphone feed,100 presets and user login with privilege settings. The E-6 meter bridge uses a standard VGA monitor, which also displays surface information such as EQ/Dynamics, panning information and AUX bus settings. The E-6 control surface is equipped for both on-air and production studios and is available in 4, 8 or 12, 16, 20 or 24 fader configurations.

  • Touchpad for control of functions on the VGA monitor
  • Dynamics, EQ, high- and low-pass filtering on every fader
  • No running PC required
  • 4 mix output busses
  • 4 mix-minus busses
  • Individual fader mix-minus w/ talkback
  • MXM assignment functions effectively follow the source
  • 4 AUX sends with individual & master level control
  • Optional master fader panel available
  • Embedded CPU / FTP for increased reliability
  • User privilege w/ passwords
  • Fader source visibility control
  • 8 character source fader displays
  • Four AUX output busses
  • Control of source select, pan, mix-minus assign, and AUX 1-4 send level from the master panel – accessed by the SET switch on each input channel strip
  • Two programmable buttons per input channel strip — use for source select or mode change
  • Mode display on each input channel strip – stereo, left, right, mono, 5.1
  • Control Room, Headphone, Studio 1 and Studio 2 monitoring controls
  • 14 general-purpose programmable buttons
  • Surfaces from 4 to 24 input faders
  • Graphic VGA display with comprehensive metering, clock and timer, less frequently accessed control functions, and for console programming
  • LED display of active source on every input channel strip
  • Four program busses
  • Four assignable global mix-minus busses
  • Individual channel mix-minus outputs
  • Talkback to mix-minus button on every channel strip
  • SET switch to access secondary functions such as source selection, mix-minus assign, panning
  • EVENT console snapshot recall and save from the front panel
  • Passcode-protected access for four levels: Intern, Operator, Production, and Engineering
  • Front-panel timer control
  • Low-profile design drops into a countertop cutout – about 2"/4cm above counter top and 3"/8cm below
  • Optional Wheatstone GLASS-E software to control the console from a remote PC
  • External rack-mounted power supply; add a second for redundancy
  • Failover local operation (optional)
  • Standalone or networked operation
  • 4, 8, 12, 16, 20 & 24 fader frames
  • Works with the WheatNet-IP Intelligent Network
 
Request Quote
 

Suggested Products