ILD100DC Induction Loop Driver (XX) - 110VAC Mains PSU

The IDL100 has been designed as a high quality amplifier for small to medium size induction loop systems in places such as video conference facilites, meeting rooms, small seminar rooms, TV rooms, nursing homes, private homes, reception and waiting rooms.

Model: DCILD100USXX

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Warranty - Yes
Wireless Receiver Transmission - Loop
Spec Sheet available - Yes

Operating Temperature (Maximum): 95 F
Operating Temperature (Minimum): 32 F
Maximum Frequency Response (Bandwidth): 6.50 kHz
Maximum Frequency Response (Bandwidth): 6500 Hz
Minimum Frequency Response (Bandwidth): 80 Hz
Minimum Frequency Response (Bandwidth): 0.08 kHz
AC Voltage (Maximum): 230 Volts
AC Voltage (Minimum): 120 Volts
Active Power: 15 Watt
DC Voltage: 12 Volts
Depth: 8.50 in
Height: 1.73 in
Width: 4.88 in
Product Weight: 2.65 lbs
Sustainability Rating: IP20
Microphone Input: 2 inputs: 3.5mm mono connector for electret microphones input DC powering for electret capsules. (Requires MAT60 adaptor to take XLR balanced microphone input). Front panel recessed gain control
Line input: 2 x phono (RCA) connectors, impedance 60kOHMS each side, 20kOHMS differential. Sensitivity matched to SCART signal level. Front panel recessed gain control
Drive voltage: 3.0Vrms (4.2Vpk) at maximum output current
Drive current: 3.4Arms (4.8Apk) continuous 1kHz sine wave, Short term peaks. 6.5A, Front panel recess drive control, Front panel LED indicates current peaks
Loop connector: Lever cable clamp
Automatic Gain Control: The AGC is optimised for speech. Dynamic range [gt]36dB, Front panel recessed input level control
Tone Control: Front panel recessed control
VOX switching: To control prioritisation of microphone 1 input. 4 different actions when microphone 1 level is at the onset of compression. Options to attenuate or turn off other inputs when microphone 1 is active, and to turn microphone 1 off when below threshold if required
Mobile applications: A DC version is available which provides similar performance for mobile applications, powered from a 12V DC supply
Cooling: Cooling is by natural convection from the product casing
Mounting: Freestanding Wall mounting - mounting holes provided on rear panel

UP35601-8-datasheet_ILD100-hi.pdf 888548 kb - Data Sheet

Project List

UP15601-6-ILD100-handbook.pdf 3439503 kb - Instructions

Project List

Find a Dealer

Find a Distributor