hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Xantech Corp. - RT1610

Addressable One-in/Sixteen-out Router

Model: RT1610

  • Responds to RC68+ hand-held programmer codes
  • Capable of being set to 55 different code groups
  • Code groups are identified by the numbers and letters that are on the face of each button on the RC68+
  • A 4-terminal plug-in connector, IR receiver input, permits connection of all IR receivers, keypads and controllers
  • A green LED adjacent to the IR receiver input serves as an input signal test-IR
Compare
Project List
Product Info
Tech Specs
Documents
Addressable one-in/sixteen-out router. Directs an infrared control signal to any one of 16 output ports, any combination of ports or all 16 as a group. Can control large groups of TV monitors (or any other A/V product) from control locations using IR receivers or SmartPads. Up to 16 devices may be addressed with one RT1610. Additional RT1610's can be connected for control of larger numbers of devices, such as TV monitors in a sports bar, by using different IR code groups on each unit. I and G output ports can drive LED indicators placed at each controlled device location.
  • Responds to RC68+ hand-held programmer codes
  • Capable of being set to 55 different code groups
  • Code groups are identified by the numbers and letters that are on the face of each button on the RC68+
  • A 4-terminal plug-in connector, IR receiver input, permits connection of all IR receivers, keypads and controllers
  • A green LED adjacent to the IR receiver input serves as an input signal test-IR
  • l 16 IR O and G emitter outputs and 16 I and G indicator outputs are located on sixteen 4-terminal plug-in connectors
  • I and G indicator outputs are current limited to 25mA, allowing the direct connection of an LED without the need for a current limiting resistor
  • Data in and data out modular jack ports allow future cascading of RT16-10's
  • Requires one 782-00 power supply for each RT16
  • Requires RC68+ programmer
  • Universal mounting fits 19-inch racks
  • All 16 IR routes are chosen simultaneously with the group on command
  • Turns the IR signal off at all IR outputs
  • IR control signals can be routed to any desired combination of ports (1 through 16) for simultaneous operating
 
Request Quote
 

Suggested Products