Lighting Control Systems : Dimmers & Dimmer Systems : AMX - CCD-RS-WH

120V Clear Connect Accessory Switch

Model: CCD-RS-WH

Clear Connect Enabled - Lutron's patented RF Technology uses a quiet band, essentially free of interference to ensure communication between system devices is reliability delivered
Perfect Way to Add Light Control – Easily integrates with existing electrical infrastructures – simply replace the light switch
Simple Web Configuration – Browse to the NetLinx Clear Connect Gateway URL to quickly setup the Clear Connect Dimmer
DEALER BENEFITS
Easily Add Light Control – Integrates with existing electrical infrastructures – simply replace the light switch

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Other Options

OVERVIEW
The Lutron Clear Connect CCD-RS is a 120V Accessory Switch that is used with CCD-8S-WH Clear Connect 120/277V Switches. The Switch when added to a Clear Connect System provides light control to virtually any location, without pulling wires.

Clear Connect Enabled - Lutron's patented RF Technology uses a quiet band, essentially free of interference to ensure communication between system devices is reliability delivered
Perfect Way to Add Light Control – Easily integrates with existing electrical infrastructures – simply replace the light switch
Simple Web Configuration – Browse to the NetLinx Clear Connect Gateway URL to quickly setup the Clear Connect Dimmer
DEALER BENEFITS
- Easily Add Light Control – Integrates with existing electrical infrastructures – simply replace the light switch
- Reliable Light Control – Lutron's patented Clear Connect RF Technology ensures ultra-reliable wireless communication between components
- Simplified AMX Integration - Use an intuitive web browser to add devices, create scenes, and program the system with no installed software tools

Warranty - Yes

AC Voltage: 120 Volts
Warranty (Length/Type): 3 Years Limited
Certifications: UL, FCC
Wattage (max capacity): 0.20 Watt
Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Power:
- Power: 120 V 50 / 60 Hz
- Typical Power Consumption
  - Dimmer / Switch: 0.2 W
  - Test conditions: load is off and nightlight mode is enabled
  - Remote Dimmer / Switch: 0 W
  - Test conditions: load is off
- Surge Protection: To withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
- Power Failure: Power failure memory: should power be interrupted, the Clear Connect Gateway will return to its previous state when power is restored
Environmental:
- Operating Humidity: 0 to 90%, Non-condensing
- Indoor use only
ESD Protection:
- To withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2
COMMUNICATIONS:
- Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater
- Remote dimmers / switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz
Installation:
- Mounting Requires a U.S. wallbox. 3 . in (89 mm) deep recommended, 2 . in (57 mm) deep minimum
- Wiring Uses conventional 3-way and 4-way wiring
Connectors:
- 1 Ethernet port, 1 coaxial power socket
Certifications:
- CSA , NOM, IC, COFETEL

ALD-CW-1 - 1-gang Claro Wallplate

ALD-CW-2 - 2-gang Claro Wallplate

ALD-CW-3 - 3-gang Claro Wallplate

Switch 2700 kb - Other

Project List

120V Clear Connect Accessory Switch

by AMX

Model: CCD-RS

Find a Dealer

Find a Distributor

Suggested Products

Cameo® In-Wall Remote Dimmer, 120V, Dusk Textured

by Crestron Electronics, Inc.

Cameo In-Wall Universal Phase Dimmer, 120 VAC, Almond Textured [Available 7/31/2020]

by Crestron Electronics, Inc.

Horizon™ In-Wall Universal Phase Dimmer with infiNET EX® Wireless Communication, 120 VAC, Almond

by Crestron Electronics, Inc.