: : AMX - NMX-ENC-N2121

JPEG 2000 Digital Cinema Grade Video over IP Encoder

Series: N2000

Model: NMX-ENC-N2121

Part #: FGN2121-SA

Input and Output Scaling-Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity.
Power Over Ethernet (POE) -Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations.
Infrared (IR) -Infrared emitter connection allows control of low-cost, IR-only display devices.
Onboard Control-All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices.
Unlimited Scalability

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

OVERVIEW

NMX-ENC-N2121 encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility. Pair with the NMX-ENC-N2221 Decoder to decode streams back to DVI or HDMI format for display on any monitor. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.

Includes IR, serial, balanced audio, two network ports (one POE), and local video pass-through port. Auto-senses analog or digital video in.

The AMX SVSI N2000 Series utilizes JPEG2000 compression for HD, cinema-grade video distribution on the LAN for applications when video quality is top priority. Users can control video quality and bandwidth usage with a simple slider control provided in the web-based user interface allowing each installation to be customized for maximum performance.

COMMON APPLICATION

The NMX-ENC-N2121 is the perfect solution for matrix switching and distribution of HD, cinema-grade quality video over LAN. Common applications include enterprise, house of worship, entertainment, and stadiums.

Input and Output Scaling-Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity.
Power Over Ethernet (POE) -Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations.
Infrared (IR) -Infrared emitter connection allows control of low-cost, IR-only display devices.
Onboard Control-All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices.
Unlimited Scalability
Pass-Through DVI-DVI interface allows easy installation with local display such as desktop PC applications.
Stand Alone or Card-Available as a standalone device, or card for use with NMX-ACC-N9206.

Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Other
Rackmountable - Yes
Warranty - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Certifications: FCC, CE
Depth: 127 mm
Height: 26.67 mm
Width: 200.36 mm
Product Weight: 0.64 kg
Video:
- Digital Video Input: HDMI (through adapter), DVI-I
- Analog Video Input
  - RGB/VGA, Component
  - VGA and Component are supported through a passive adapter
- Video Output
  - Network video over Ethernet via RJ45 port, DVI-D, HDMI
  - HDMI is supported through a passive adapter
- Formats
  - HDMI (through adapter), DVI-D, DVI-I, Dual-Mode DisplayPort (DP++), HDCP content protection support, RGBHV, YPbPr
  - HDMI and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
- Progressive Input Resolutions
  - HDMI and DVI (Progressive)
    - Pixel clock between 27 MHz - 150 MHz
    - Minimum resolution of 720x480p
    - Maximum horizontal resolution of 1920 or a vertical resolution of 1080
- Interlaced Input Resolutions
  - HDMI and DVI (Interlaced)
  - HD up to 1080i60
- Analog Input Resolutions
  - VGA
    - Pixel clock between 27 MHz - 150 MHz
    - Minimum resolution of 720x480p
    - Maximum horizontal resolution of 1920 or a vertical resolution of 1080
  - Component
  - HD up to 1080p60
- Analog-To-Digital Conversion: 8-bit 150 MHz per each of three color channels
- Output Resolutions: Matched to inputs
Note: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz.
Note: The N2121 Encoder does not accept Composite or S-Video (YC).
Audio:
- Input Signal Types: Embedded audio on DVI-D or HDMI (through adapter), or Analog Stereo (Balanced or Unbalanced).
- Output Signal Types: Ethernet
- HDMI Audio Formats: Stereo 2-channel, 5.1 audio, 7.1 audio
- Analog Audio Formats: Stereo 2-channel
- Analog-To-Digital Conversation: 16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency:
- Latency: 25 ms
Note: To calculate an end-to-end latency value, add the given Encoder latency (shown above) to your Decoder's latency (which is provided in the Decoder's Specifications sheet).
COMMUNICATIONS:
- Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP.
- HDMI: HDCP, EDID management
Ports:
- +12V 2A: One 12 Volt DC power input
- P0
  - 8-wire RJ45 female
  - 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  - Provides network connection, network AV video, and power to the Encoders and Decoders
- P1
  - 8-wire RJ45 female
  - 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  - Provides network connection
- IR: 2-pin terminal Phoenix connector. Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232: 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
- AUDIO: 5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced input. Dedicated audio input
- DVI-D OUT: DVI-D female; HDMI/DVI digital video/audio output. Allows for video and embedded digital audio output.
- DVI-I IN: DVI-I female; HDMI/DVI digital video/audio input. Allows for the use of analog or digital video sources (as well as embedded audio).
Note: DVI-D output is the digitally converted analog signal from the DVI-I input. Appropriate adapter or interface cable required for DVI to accommodate HDMI. With the right adapter, the DVI-I Input port accepts component signals.
CONTROLS AND INDICATORS-FRONT PANEL:
- RESET Button
  - Recessed pushbutton
  - Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button
  - Recessed pushbutton
  - Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED
  - On solid (green) when operating power is supplied (via PoE or local power supply)
  - This activity is also shown by the PWR LED on the rear panel
- STATUS LED
  - On flashing (green) when there is software activity
  - This activity is also shown by the STAT LED on the rear panel
CONTROLS AND INDICATORS – REAR PANEL:
- PWR LED: Same as POWER LED described above
- HDMI LED: On (green) when there is a connection to a valid video source
- STAT LED: Same as STATUS LED described above
- STRM LED: On (green) when the unit is streaming video
POWER SUPPLY:
- Power Supply, External, Not Included: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; Not included in shipment. NMX-ACC-N9312 (FGN9312)
- Power over Ethernet (PoE): Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1).
Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only. PoE does not pass through the daisy chain (P1) port.
Humidity: 10 to 90 % RH (non-condensing)
Heat Dissipation: Up to ~44 BTU/hr
General:
- Mounting Options
  - Stand alone, surface mount, wall mount, or rack mount
  - Surface and wall mounting requires (not included): NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
  - Rack mounting requires one of the following (not included)
    - NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side for SVSI N-Series Encoders and Decoders
    - NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
Regulatory Compliance: HDCP
Warranty (Length/Type): 3 Years Limited
DC Voltage: 12 Volts
Current Draw: 2 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts

Encoder 374 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

AV over IP 4K 1Gbps Streaming Transceiver Wall Plate with 2-HDMI In, 1-HDMI Out, RS-232, IR, Audio, LAN, USB 2.0., Black

by Aurora Multimedia Corporation

AV over IP 4K 1Gbps Streaming Transceiver Wall Plate with 2-HDMI In, 1-HDMI Out, RS-232, IR, Audio, LAN, USB 2.0., White

by Aurora Multimedia Corporation

AV over IP 4K 1Gbps Streaming Transceiver Wall Plate with 1-HDMI In. 1-VGA In, 1-HDMI Out, RS-232, IR, Audio, LAN, USB 2.0., Black

by Aurora Multimedia Corporation