The AC-MX88-AUHD is a true 8x8 HDMI matrix switch. Supporting HDMI 2.0(a/b), HDCP 2.2, up to 4K video resolution, and up to 18 Gbps bandwidth. This switch allows any source (Blu-ray, UHD Blu-ray, satellite receiver, game consoles, PCs, etc ... ) to be shown on any of the connected displays. This matrix equalizes and amplifies the output to ensure the HDMI signal can be transmitted through long HDMI cables without loss of quality. Audio Delay is “On-Board” so you can manage lip-sync issue before it is a problem. Also with built in Scalers you don't have to forfeit that 4K signal just because you have a couple older displays. All that with Full EDID management allows maximum flexibility with today's wide mixture of sources and displays.
- HDMI 2.0(a/b)
- 18Gbps bandwidth support
- 4K60 4:4:4 support
- Full HDR support (HDR 10 and 12 bit)
- Dolby Vision, HDR10+ and HLG support
- HDCP 2.2 (and all earlier versions supported)
- 1080p > 4K and 4K > 1080p up/down scalers on each output
- Advanced EDID management
- IR, RS-232 and LAN control options
- Digital Toslink out (7CH PCM, DD, DD+, DTS, DTS-MA)
- Balanced analog out (2CH PCM)
- Audio delay for digital and analog out
- HDBaseT compatibility mode for mixed systems
- Driver support for Crestron, C4, RTI, ELAN and more
- Extracted audio now supports DD+, DTS master audio on Toslink
- Extracted audio now has 3 operating modes
- Bound to input, bound to output, or independent matrix
- Built in test pattern on each output to verify infrastructure
- Includes:
- AC-MX88-AUHD (matrix switch)
- Operating instructions
- 12V/4A Locking power supply
- 1 x IR Remote control
- 1 x IR Extension cable
