The PRS-CSRK is a PCB with the same functionality as the remote call station, PRS-CSR, but without its housing and other components. It is for the construction of custom applications. It connects via a CAT-5 cable, one-to-one, to the call station interface, PRS-CSI, which is part of the Praesideo optical network. The CAT-5 cable, carrying digital audio and control data, can be as long as 1 km. The length of the CAT-5 cable is not a part of the Praesideo optical network length. This considerably increases the overall possible length of the optical network.
The PRS-CSR can be extended with up to 16 keypads
(LBB 4432/00 or LBB 4434/00), each with eight configurable keys. Extension with a numeric keypad (PRS-CSNKP) is also possible.
FunctionsThe call station has a connection for a supervised microphone. A limiter and a speech filter improve intelligibility and prevent clipping of the audio. It has a volume control for the monitoring speaker and the headset. When it plays a chime or a pre-recorded message, the call station activates its speaker. When a headset is connected, it replaces the microphone and speaker. The call station has its own DSP, and converts between analog and digital audio. The audio processing can include sensitivity adjustment, limiting, and parametric equalization.
The kit connects via a CAT-5 cable to an PRS-CSI unit, which interfaces it to the Praesideo optical network. The cable can be up to 1 kilometer long. The station gets its power from the interface unit via the CAT-5 cable, but is also equipped with a local power supply connection for extreme cases with a very long cable and many keypads.
- Connects to call station interface via CAT-5 cable
- Up to 1 km from Praesideo optical network
- Uses standard Praesideo keypads for extension
- Built-in limiter
- Powered via CAT-5 and/or local power supply