3-Series® DigitalMedia Presentation System 300

Series: DigitalMedia

Model: DMPS3-300-C

Part #: 6506615

High-Definition multimedia system switcher, mic mixer, audio DSP, amplifier, and control system
Preloaded DMPS3 .AV Framework™ software enables customized presentation control without programming [1]
Allows quick and easy setup using just an iPad®, computer, or Crestron® touch screen [1]
Integrated 3-Series Control System® enables fully-programmable room control
DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [5]

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The DMPS3-300-C from Crestron® is a complete, high-definition presentation control and signal routing solution for classrooms, boardrooms, lecture halls, and videoconference rooms. Integrating the control system, multimedia matrix switcher, mic mixer, audio DSP, and amplifier all into one 3-space rack mount package, the DMPS3-300-C affords extensive signal routing flexibility and high-performance signal processing without the need for separate components.

Auto-configuring inputs enable plug-and-play compatibility with a wide range of digital and analog sources. Built-in DigitalMedia™ and HDBaseT® connectivity affords a streamlined, long-distance wiring solution for additional remote sources and display devices, and for facility-wide integration as part of a larger media distribution system.

No Programming Required!:
Installing the DMPS3-300-C is easy, fast, and affordable. There's no programming required to deliver a fully-functional presentation system — with simple controls provided for system power, source selection, and volume adjustment using a Crestron touch screen, computer, or iPad®.

Complete system configuration is enabled right from the touch screen, computer, or iPad, allowing the installer to quickly specify display devices and assign user-friendly names and icons to the inputs and outputs. That's it! Preloaded DMPS3 .AV Framework™ software does all the programming for you, enabling the DMPS3-300-C to control up to four displays, connect to AirMedia™ and DM® devices, and communicate with Crestron Fusion® Enterprise Management Software.[1]

HD System Switcher:
The DMPS3-300-C provides high-performance routing of numerous digital and analog sources to up to four separate projectors, flat panel displays, codecs, touch screens, and other devices.

Connectivity is provided for up to five HDMI® sources[2], or other combinations of HDMI, RGB, SPDIF, analog audio, and analog video sources (plus additional remote sources via DM 8G+® or HDBaseT). Input auto-detection and auto-switching eliminates the need to configure the inputs – simply connect your source and the DMPS3-300-C selects the right audio and video combination.

High-Definition multimedia system switcher, mic mixer, audio DSP, amplifier, and control system
Preloaded DMPS3 .AV Framework™ software enables customized presentation control without programming [1]
Allows quick and easy setup using just an iPad®, computer, or Crestron® touch screen [1]
Integrated 3-Series Control System® enables fully-programmable room control
DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [5]
HDBaseT® Certified — Enables direct connection to other HDBaseT certified equipment
Provides matrix signal routing for up to 7 video sources and 4 displays
Handles HDMI®, DVI, DisplayPort Multimode, HDBaseT, and SPDIF digital sources [2]
Handles RGB, composite, S-Video, component, and stereo audio analog sources [9]
Features auto-detecting, auto-switching inputs for all types of video and audio sources
QuickSwitch HD® technology manages HDCP keys for fast, reliable switching
Auto-Locking™ technology achieves rapid switching between disparate sources
Performs automatic AV signal format management via EDID
External scaler options provide discrete image optimization for each display device [7]
Includes built-in 6-channel gated microphone mixing w/DSP
Affords versatile audio signal mixing and routing to 7 separate outputs
Allows audio-follow-video or breakaway switching for all inputs
Enables HDMI audio signal extraction and embedding
Handles Dolby Digital®, Dolby® TrueHD, DTS®, DTS-HD®, and uncompressed 7.1 linear PCM audio [3,4]
Provides 3 stereo analog outputs with independent DSP per output
Features built-in amplifier, selectable for 20W/Ch. @ 8 ohm stereo or 40W @ 70/100 Volts mono
Enables USB signal routing via DM® transmitters and receivers or USB-EXT-DM extenders [8]
Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports
Supports Crestron touch screens, keypads, and wireless remotes
Supports XPanel with Smart Graphics™ computer and Web based control
Supports iPhone®, iPad, and Android™ control apps
Supports universal remotes via external RC-5 compatible IR receiver [7]
Integrates with Crestron Fusion® Enterprise Management Software
Enables IT-friendly network integration via SNMP
Integrated Ethernet switch provides a single-point LAN connection
Private Network Mode — requires just one IP address for the complete system
Provides easy setup and diagnostics via front panel or software
Features an internal universal power supply for worldwide compatibility
Furnishes Power over DM or HDBaseT for PoDM/PoH-powered devices [6]
3-space 19-inch rack-mountable

Distributed Signal Types - Audio
Distributed Signal Types - Digital Media
Distributed Signal Types - Video
HDBaseT - Yes
Rackmountable - Yes
Warranty - Yes
RX RS-232 - No
TX RS-232 - No

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 5 C
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 30 Watt
Current Draw: 4 Amps
Depth: 414.27 mm
Height: 132.08 mm
Width: 438.91 mm
Product Weight: 7.44 kg
Colour: Black
Warranty (Length/Type): 3 Years Limited
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Operating System:
MEMORY:
- SDRAM : 512 MB
- Flash : 4 GB
COMMUNICATIONS:
- Ethernet : 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, IEEE 802.1X, SNMP, BACnet™/IP[10], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client, RSTP, Private Network Mode
- Cresnet® : Cresnet master mode
- USB : USB signal routing via select DM transmitters and receivers, or via USB-EXT-DM extenders[8]; USB device port for computer console (setup)
- RS-232 : 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
- IR/Serial : 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; supports CNXRMIRD IR Receiver[7]
- DigitalMedia™ : DM 8G+®, HDCP, EDID, CEC, PoDM, Ethernet
- HDBaseT® : HDCP, EDID, PoH, Ethernet
- HDMI® : HDCP, EDID, CEC
- NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and the control system
Video:
- Switcher : 7x4 matrix, auto-switching, auto-detecting multi-format digital/analog source inputs, QuickSwitch HD® technology
- Input Signal Types : HDMI w/Deep Color & 3D[4] (DVI & DisplayPort Multimode compatible [2]), DM 8G+ & HDBaseT w/Deep Color & 3D[4], RGB/VGA (RGBHV, RGBS, RGsB)[9], component (YPbPr), S-Video (Y/C), composite (NTSC, PAL)
- Output Signal Types : HDMI w/Deep Color & 3D[4] (DVI compatible[2]), DM 8G+ & HDBaseT w/Deep Color & 3D[4]
- Input Resolutions, HDMI & HDBaseT, Progressive : 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
- Input Resolutions, HDMI & HDBaseT, Interlaced : 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
- Input Resolutions, RGB : 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz
- Input Resolutions, Component : 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60
- Input Resolutions, Composite & S-Video : 480i, 576i
- Output Resolutions : Matched to inputs
- Analog-To-Digital Conversion : 10-bit 165 MHz per each of 3 channels
- RGB Source Image Adjustments :
  - Brightness: 0% to 50%;
  - Contrast: -50% to +50%;
  - Fine Phase: -16 to +15;
  - X Position: -100 to +100;
  - Y Position: -10 to +10;
  - RGB Gains: -50 to +50, separately adjustable for Red, Green, and Blue
- YPbPr, Y/C, or Composite Source Image Adjustments :
  - Brightness: 0% to 50%;
  - Contrast: -50% to +50%;
  - Saturation: -50% to +50%;
  - Hue: -50% to +50%
Audio:
- Switcher/Mixer : 7x7 stereo source switcher, auto-detecting multi-format digital/analog source inputs, audio-follow-video or breakaway, 6-channel gated mic mixer w/DSP, independent 6-ch mic + source mixer per output, dual codec mixer, independent stereo DSP per analog output, integrated power amplifier, 7x4 multichannel source switcher, digital audio mixer bypass mode for multichannel pass-through to digital outputs
Typical of 6 microphone input channels (Mic/Line 1 – 6):
- Input Signal Types : Mono analog mic or line level
- Analog-To-Digital Conversion : 24-bit 48 kHz
- Phantom Power : Enable/Disable per channel
- Gain : 0 to +60 dB Gain adjustment, plus Mute
- Delay : 0.0 to 85.0 ms
- EQ Center Frequencies : 50 to 200 Hz (Band 1), 200 to 800 Hz (Band 2), 800 to 3.2k Hz (Band 3), 3.2k to 12.8k Hz (Band 4)
- EQ Gain : ±12.0 dB per band
- High-Pass Filter : On or Off
- Gating Threshold : -80 to 0 dB
- Gating Depth (Attenuation) : -80 to 0 dB
- Gating Attack : 1 to 250 ms
- Gating Release : 1 to 1000 ms
- Compression Threshold : -80 to 0 dB
- Compression Ratio : 1:1 to 10:1
- Compression Attack : 1 to 250 ms
- Compression Release : 1 to 1000 ms
- Compression CurveHard or soft knee
Typical of 7 source input channels (Input 1 – 7 & Audio In 1 – 5):
- Input Signal Types : HDMI (DisplayPort Multimode compatible[2]) on Inputs 1-5, analog 2-channel on Inputs 1-5, S/PDIF on Input 5 only, DM 8G+ & HDBaseT on Inputs 6 & 7
- Formats, Analog : Stereo 2-channel
- Formats, HDMI & DM : Dolby Digital®, Dolby Digital EX, Dolby Digital Plus[4], Dolby® TrueHD[4], DTS®, DTS-ES, DTS 96/24, DTS-HD High Res[4], DTS-HD Master Audio™[4], LPCM up to 8 channels
- Formats, SPDIF : LPCM 2-channel
- Analog-To-Digital Conversion : 24-bit 48 kHz
- Input Compensation : ±10.0 dB [3]
Typical of 3 analog line outputs w/DSP (Program Out, Aux Out 1, & Aux Out 2):
- Output Signal Type/Format : Stereo 2-channel
- Digital-To-Analog Conversion : 24-bit 48 kHz
- Mic 1 – 6 : -80 to +10 dB Level adjustment range, plus Mute and Pan
- Mics Master : -80 to +10 dB Level adjustment range, plus Mute
- Source : -80 to +10 dB Level adjustment range, plus Mute and Balance
- Codec 1 – 2 : -80 to +10 dB Level adjustment range, plus Mute and Balance (Codec 1 available at Program Out and Aux 2 Out only, Codec 2 available at Program Out and Aux 1 Out only)[11]
- Master Volume : -80 to +10 dB Level adjustment range, plus Mute and Mono
- Mixer Presets : 1 through 5
- Bass : ±12.0 dB
- Treble : ±12.0 dB
- Equalization : 10-band graphic + 4-band parametric
- GEQ Center Frequencies : 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
- GEQ Gain : ±12.0 dB per band
- PEQ Center Frequencies : 10 to 22000 Hz per band
- PEQ Gain : -36.0 to +24.0 dB per band
- PEQ Bandwidth : 0.02 to 3.50 octaves per band
- PEQ Types : Peaking EQ, High Pass, Low Pass, High Shelf, Low Shelf, Notch
- Delay : 0.0 to 85.0 ms
- Limiter Threshold : -80 to 0 dBz
- Limiter Ratio : 1:1 to 10:1
- Limiter Attack : 1 to 250 ms
- Limiter Hold : 1 to 200 ms
- Limiter Release : 1 to 1000 ms
- Limiter Curve : Hard or soft knee
- EQ Presets : 1 through 10 (includes Delay and Limiter settings)
- Frequency Response :
  - 20 Hz to 20 kHz ±0.5 dB (digital source);
  - 20 Hz to 20 kHz ±0.5 dB (analog line source);
  - 20 Hz to 20 kHz ±0.7 dB (microphone source)
- S/N Ratio :
  - >108 dB, 1 kHz, A-weighted (digital source);
  - >103 dB, 1 kHz, A-weighted (analog line source)
- THD+N :
  - <0.002%, 20 Hz to 20 kHz (digital source);
  - <0.005%, 20 Hz to 20 kHz (analog line source);
  - <0.05%, 20 Hz to 20 kHz (microphone source)
- Stereo Separation :
  - >108 dB (digital source);
  - >103 dB (analog source)
- Channel Separation : >103 dB
Typical of 4 digital outputs (HDMI Output 1 – 2 & DM Output 3 – 4):
- Output Signal Types : HDMI (DVI compatible[2]) on Outputs 1 & 2, DM 8G+ & HDBaseT on Outputs 3 & 4
- Formats : Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, LPCM up to 8 channels
- Mic 1 – 6 : -80 to +10 dB Level adjustment range, plus Mute and Pan[3]
- Mics Master : -80 to +10 dB Level adjustment range, plus Mute[3]
- Source : -80 to +10 dB Level adjustment range, plus Mute and Balance[3]
- Master Volume : -80 to +10 dB Level adjustment range, plus Mute[3]
- Mixer Presets : 1 through 5
- Frequency Response :
  - 20 Hz to 20 kHz ±0.5 dB (digital source);
  - 20 Hz to 20 kHz ±0.5 dB (analog line source);
  - 20 Hz to 20 kHz ±0.7 dB (microphone source)
- S/N Ratio :
  - >108 dB, 1kHz, A-weighted (digital source);
  - >103 dB, 1kHz, A-weighted (analog line source)
- THD+N :
  - <0.002%, 20 Hz to 20 kHz (digital source);
  - <0.005%, 20 Hz to 20 kHz (analog line source);
  - <0.05%, 20 Hz to 20 kHz (microphone source)
- Stereo Separation :
  - >108 dB (digital source);
  - >103 dB (analog source)
  - Channel Separation :
    - >108 dB (digital source);
    - >103 dB (analog source)
- Speaker Outputs (same signal as Program Out):
  - Output Modes : 4ohm/8ohm stereo, 70V mono, or 100V mono
  - Output Power, 4ohm/8ohm : 20 Watts RMS per channel at 8 Ohms, 4 Ohms tolerant
  - Output Power, 70/100V : 40 Watts RMS
  - Frequency Response : 20 Hz to 20 kHz ±1 dB @ 20 Watts into 8 Ohms; 100 Hz to 20 kHz ±2.5 dB @ 70 or 100 Volts
  - S/N Ratio :
    - 98 dB @ 20 Watts into 8 Ohms, 1 kHz, A-weighted;
    - 96 dB @ 20 Watts in 4 Ohms, 1 kHz, A-weighted
  - THD+N : <0.1% (1 kHz), <0.7% (20 Hz to 20 kHz), @ 20 Watts into 4 or 8 Ohms
  - Stereo Separation : >65 dB @ 20 Watts, 1 kHz
- Connectors – Audio/Video Inputs:
  - HDMI INPUT 1 – 5
    - (5) 19-pin Type A HDMI female, digital video/audio inputs;
    - Signal Types: HDMI, DVI, or DisplayPort Multimode[2,4]
  - RGB INPUT 3 – 5
    - (3) DB15HD female, analog RGB/video inputs;
    - Signal Types: RGBHV, component, S-Video, or composite[9];
    - Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL;
    - Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration;
    - Input Impedance: 75 Ohms nominal;
    - Sync Detection: RGBHV, RGBS, RGsB, YPbPr;
    - Sync Input Level: 3 to 5 Vp-p;
    - Sync Input Impedance: 2.2k Ohms;
    - Note: RGB Inputs 3-5 and HDMI Inputs 3-5 are mutually exclusive; HDMI overrides RGB when using the auto-switching feature
  - Y, PB/Y, PR/C/COMP INPUT 5
    - (3) BNC female comprising (1) auto-sensing multi-format analog video input;
    - Signal Types: Component, S-Video, or composite;
    - Formats: YPbPr, Y/C, NTSC or PAL;
    - Input Level: 1 Vp-p nominal;
    - Input Impedance: 75 Ohms nominal;
    - Note: Video Input 5, RGB Input 5, and HDMI Input 5 are mutually exclusive; HDMI and RGB override Video when using the auto-switching feature
  - SPDIF INPUT 5
    - (1) RCA female, S/PDIF coaxial digital audio input;
    - Input Impedance: 75 Ohms;
    - Note: SPDIF Input 5 and HDMI Input 5 are mutually exclusive; HDMI overrides SPDIF when using the auto-switching feature
  - AUD IN 1 – 5
    - (5) 5-pin 3.5mm detachable terminal blocks;
    - Balanced/unbalanced stereo line-level analog audio inputs;
    - Input Impedance: 24k Ohms balanced/unbalanced;
    - Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
    - Note: Analog Audio Inputs 1-5, SPDIF Input 5, and HDMI Inputs 1-5 are mutually exclusive; HDMI and SPDIF override Analog Audio when using the auto-switching feature
  - DM INPUT 6-7
    - (2) 8-pin RJ45 female, shielded;
    - DM 8G+ input, HDBaseT compliant;
    - PoDM and PoH PSE (Power Sourcing Equipment) port[6];
    - Connects to the DM 8G+ output of a DM transmitter or other DM device, or to an HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable[5]
  - MC1/LN1 – MC6/LN6
    - (4) 6-pin 3.5mm detachable terminal blocks;
    - Comprises (6) balanced microphone/line audio inputs;
    - Balanced Mic Input Level: -60 to 0 dBV, 1 Vrms maximum;
    - Balanced Line Input Level: -31 to +11 dBV, 3.7 Vrms maximum;
    - Unbalanced Line Input Level: -37 to +5 dBV, 1.85 Vrms maximum;
    - Mic Input Impedance: 3.9k Ohms balanced;
    - Line Input Impedance: 19k Ohms balanced, 9.5k Ohms unbalanced;
    - Phantom Power: 48 Volts DC, software enabled/disabled per channel
- Connectors – Audio/Video Outputs:
  - SPEAKER OUTPUT 4ohm/8ohm L – R
    - (2) 2-pin 7.62mm 15A detachable terminal blocks;
    - 4-8 Ohm stereo speaker-level audio output;
    - Wire Size: Terminals accept up to 14 AWG;
    - Output Power: 20W RMS per channel stereo at 8 Ohms, 4 Ohms tolerant
  - SPEAKER OUTPUT 70/100V
    - (1) 2-pin 7.62mm 15A detachable terminal block;
    - Transformer-isolated 70 or 100 Volt mono speaker-level audio output;
    - Wire Size: Terminals accept up to 14 AWG;
    - Output Power: 40W RMS mono at 70 or 100 Volts;
    - Note: 4ohm/8ohm and 70/100V outputs are mutually exclusive
  - PROG OUT
    - (1) 5-pin 3.5mm detachable terminal block;
    - Balanced/unbalanced stereo line-level audio output;
    - Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
    - Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
  - AUX OUT 1 – 2
    - (2) 5-pin 3.5mm detachable terminal blocks;
    - Balanced/unbalanced stereo line-level audio outputs;
    - Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
    - Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
  - HDMI OUTPUT 1 -2
    - (2) 19-pin Type A HDMI female, digital video/audio output;
    - Signal Types: HDMI, DVI[2]
  - DM OUTPUT 3-4
    - (2) 8-pin RJ45 female, shielded;
    - DM 8G+ output, HDBaseT compliant;
    - PoDM and PoH PSE (Power Sourcing Equipment) port[6];
    - Connects to the DM 8G+ input of a DM receiver/room controller or other DM device, or to an HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable[5]
- Connectors - Control & Power:
  - IR/SERIAL OUT 1 – 4:
    - (4) 2-pin 3.5mm detachable terminal blocks;
    - IR/Serial output ports;
    - IR output up to 1.2 MHz;
    - 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
  - IR IN:
    - (1) 3-pin 3.5mm detachable terminal block
    - For connection of the CNXRMIRD IR Receiver[7];
    - Allows control from IR wireless remotes using RC-5 command set
  - INPUT 1 – 4:
    - (1) 5-pin 3.5mm detachable terminal block;
    - Comprises (4) programmable digital inputs;
    - Input Voltage Range: 0 to 24 Volts DC, referenced to GND;
    - Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band;
    - Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts;
    - Pull-up Resistor: 2.2k Ohms per input
  - RELAY 1 – 4:
    - (1) 8-pin 3.5mm detachable terminal block;
    - Comprises (4) normally open, isolated relays;
    - Rated 1 Amp, 30 Volts AC/DC;
    - MOV arc suppression across contacts
  - COM A – B:
    - (2) DB9 male, bidirectional RS-232 ports;
    - Up to 115.2k baud, hardware and software handshaking support
  - NET:
    - (4) 4-pin 3.5mm detachable terminal blocks;
    - Cresnet Master ports, paralleled;
    - Available Cresnet Power: 30 Watts
  - SERVICE : (1) USB Type B female, for factory use only
  - PoDM 48VDC IN:
    - (1) 4-pin snap & lock DC power connector, female;
    - 48 Volt DC power input for PoDM power pack[6];
    - Enables PoDM and PoH power sourcing
  - 100-240V~4.0A 50/60Hz:
    - (1) IEC 60320 C14 main power inlet;
    - Mates with removable power cord, included
  - G:(1) 6-32 screw, chassis ground lug
  - LAN:(1) 8-wire RJ45 female, 10Base-T/100Base-TX/1000Base-T Ethernet port
  - COMPUTER (front):
    - (1) USB Type B female (cable included);
    - USB computer console port (for setup only)
- LCD Display:
  - Green LCD alphanumeric, adjustable backlight, 2 lines x 20 characters per line;
  - Displays input/outputs by name, volume levels, setup menus, signal routing, device info, and other system information
- Controls & Indicators:
  - NET : (1) yellow LED, indicates Cresnet bus activity
  - LAN : (1) yellow LED, indicates Ethernet activity
  - HW-R : (1) recessed miniature pushbutton for hardware reset, reboots the control system
  - SW-R : (1) recessed miniature pushbutton for software reset, restarts the SIMPL program
  - POWER : (1) pushbutton and green LED, programmable for system power control
  - SOFTKEYS : (4) pushbuttons for activation of LCD driven functions and passcode entry
  - MENU : (1) pushbutton, steps menu back one level
  - ENTER : (1) pushbutton, executes highlighted menu or value
  - VOLUME : (1) continuous turn rotary encoder, adjusts menu parameters, defaults to Program audio volume
  - MUTE : (1) pushbutton and red LED, mutes the Program audio output
  - ROUTE : (1) pushbutton and red LED, selects ROUTE mode to allow routing changes
  - VIEW : (1) pushbutton and red LED, selects VIEW mode to view current routing
  - INFO : (1) pushbutton and red LED, selects INFO mode to view AV and device info
  - INPUT 1 – 6 : (6) pushbuttons and red LEDs, select input to be routed
  - OUTPUT 1 – 2, PROG, AUX 1 – 2 : (5) pushbuttons and red LEDs, select output destination(s)
  - SPEAKER OUTPUT (rear) : (1) 3-position slide switch, selects the amplifier output configuration
  - DM INPUT 6 (rear) : (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
  - DM INPUT 6 PoDM (rear) : (1) green LED, indicates upstream device is drawing power over DM
  - DM OUTPUT 2 (rear) : (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
  - DM OUTPUT 2 PoDM (rear) : (1) green LED, indicates downstream device is drawing power over DM
  - LAN (rear) : (2) LEDs, bi-color LED (left) indicates Ethernet speed and activity, green LED (right) indicates Ethernet link status
- Power Requirements:
  - Power over DM (PoDM) : PoDM PSE (Power Sourcing Equipment), each DM 8G+ port supplies up to 15.4 Watts (Class 0-3) to one PoDM Powered Device[6]
  - Power over HDBaseT (PoH) : PoH PSE (Power Sourcing Equipment), each DM 8G+ port supplies up to 15.4 Watts (Class 0-3) to one PoH Powered Device[6]
  - PoDM Power Pack : 1.875 Amp @ 48 Volts (100-240 Volts AC, 50/60 Hz power pack, model PW-4818DU sold separately)
- Environmental:
  - Humidity : 10% to 90% RH (non-condensing)
  - Heat Dissipation : 277 BTU/hr
- Enclosure:
  - Chassis : Metal, black finish, fan-cooled, vented sides
  - Front Panel : Metal, black finish with polycarbonate label overlay
  - Mounting : Freestanding or 3U 19-inch rack-mountable (adhesive feet and rack ears included)
- Notes:
  - 1.The DMPS3 .AV Framework Base Program enables setup and control of the DMPS3-300-C without programming. It comes preloaded on the DMPS3-300-C, and is also available for download from the Crestron Website. To configure this feature requires one of the following user interface options: A) a Crestron TSW-752-B-DMPS3 PAK touch screen package (sold separately), B) a Crestron TSW-752 touch screen (sold separately) with the DMPS3 .AV Framework Project for TSW-752 loaded, C) an Apple iPad running the Crestron App (full paid version required, sold separately) with the DMPS3 .AV Framework Project for iPad loaded, or D) a Windows® or Mac® computer with the DMPS3 .AV Framework Project for XPanel installed. Any of these options may also be used by the end-user to control the system. Some functions described in this spec sheet may not be supported using the DMPS3 .AV Framework Base Program feature. For additional resources and a list of supported display devices, please visit: www.crestron.com/dmps.
  - 2.HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI interface cables are available separately.
  - 3. Routing of a multichannel audio signal via any HDMI or DM input and output requires the input to be set for “mixer bypass” mode. When that input is routed to a given digital output, all audio controls on that output are disabled, and the ability to simultaneous route microphone signals to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input.
  - 4.High-bitrate 7.1 encoded audio, 3D video, and Deep Color video signals are only supported via HDMI inputs 1 and 2, and DM inputs 6 and 7.
  - 5.For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable or third-party CAT5e (or better) UTP or STP. (Crestron legacy DM-CBL DigitalMedia Cable or DM-CBL-D DigitalMedia D Cable may also be used.) The maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
  - 6.Supplying Power over DM (PoDM) or Power over HDBaseT (PoH) requires an external power pack, model PW-4818DU, sold separately.
  - 7.Item(s) sold separately.
  - 8.Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). The USB ports onboard the DMPS3-300-C are not usable for USB signal routing.
  - 9.The RGB/VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types through the RGB connection.
  - 10.License required. The DMPS3-300-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.
  - 11.The settings for CODEC 1 & 2 are global for all outputs that receive these signals.
- Certifications: CE

DMPS3-4K-250-C - 3-series 4K DigitalMedia Presentation System 250 with AirMedia 2.0 capability built-in

DMPS3-4K-350-C - 3-series 4K DigitalMedia Presentation System 350 with AirMedia 2.0 capability built-in

DMPS3-Series_Brochure_2014-07_v21_WEB.pdf 765 kb - Brochure

Project List

dmps3-300-c.pdf 1349 kb - Data Sheet

Project List

Find a Dealer