FlipTop AC Dual Universal Power Outlet Module

Crestron® FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop™ to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.
The FTA-PWR-102 model provides two NEMA 5 type outlets rated for 10 Amps (total) at 125 Volts AC, 50/60 Hz. This module occupies two adjacent FlipTop connector plate spaces allowing up to two modules to be installed in a single FlipTop. The FTA-PWR-102 is UL® Listed, and features an attached 9 ft (2.7 m) grounded AC power cord, which exits the bottom of the module and provides for connection to a local AC power source.
Models FTA-PWR-211, -221, and -251 each provide a single “International” outlet rated for 10 Amps at 220-240 Volts AC, 50/60 Hz. Each of these modules occupies three contiguous FlipTop connector plate spaces, and features an IEC 60320 C14 type main power inlet on the bottom of the module for connection to a local AC power source. Refer to the chart below for the type of outlet and applicable countries for each model.
Model FTA-PWR-261 provides a single “universal” outlet, which accommodates several different types of plugs (refer to the chart below). It is rated for 10 Amps at 100-240 Volts AC, 50/60 Hz.
Models FTA-PWR-212, -222, and -262 are dual outlet versions of the FTA-PWR-211, -221, and -261 respectively. Each of these modules occupies three contiguous connector plate spaces plus one adjacent cable pass-through plate space. Two main power inlets are provided on the bottom of each module (one per outlet).