Lighting Control Systems : Dimmers & Dimmer Systems : Crestron Electronics, Inc. - GLXP-DIMFLV8-LP

8 Channel 0-10 V Dimmer Module, Low Profile

Model: GLXP-DIMFLV8-LP

8 channels of 0-10 V dimming control
Compatible with lighting and motor loads
Support for 100-277 V applications
16 A load rating per channel
Arc-less switching

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The GLXP-DIMFLV8-LP is a Crestron Green Light® switching module that features 8 channels of 0-10 V dimming control. This module is part of a complete Crestron® engineered GLPS Green Light switching panel.

Override Input

An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset state. States can be set and saved locally from the front panel or remotely via software.

Cresnet® Communications

The GLXP-DIMFLV8-LP communicates with a Crestron control system using the Cresnet control network. A pair of Cresnet ports are provided on the GLXP-DIMFLV8-LP to allow easy daisy-chaining of several Crestron devices.

8 channels of 0-10 V dimming control
Compatible with lighting and motor loads
Support for 100-277 V applications
16 A load rating per channel
Arc-less switching
Positive air gap at each output
Phase-independent channels
Cresnet® communications
Redundant power capability
Local controls for testing and verification
Local and remote override capability
Non-volatile power failure memory
GLEX cabinet installation
CEC Title 24 2013 Compliant

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
AC Voltage (Maximum): 277 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 5 Watt
DC Voltage: 24 Volts
Certifications: CE, CEC, UL
Depth: 82.80 mm
Height: 281.18 mm
Width: 241.30 mm
Load Ratings:
•Dimmer Channels: 8
•Per Channel: 16 A at 100-277 VAC, 50/60 Hz; 0.5 HP at 120 V, 1 HP at 230 V, 1 HP at 277 V
•Dim Load Types: 0-10 V fluorescent ballast or LED driver (4-wire); 60 mA max current sink
•Switch Load Types: Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, high-intensity discharge (HID), motors
•Relay Lifetime: 1,000,000 on/off operations at full electronic ballast load
Connectors:
•NET: (2) 5-pin headers
•N1: (1) Terminal block; Line input neutral; Accepts 10-14 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•L1-L8: (8) Terminal blocks; Line power inputs; Accepts 10-14 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•SW1-SW8: (8) Terminal blocks; Switch channel outputs; Accepts 10-14 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•0-10V DIM (-): (1) 8-position terminal block; Dim channel common; Galvanically isolated; May be wired as Class 1 or Class 2; Accepts 12-28 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•0-10V DIM (+): (1) 8-position terminal block; Dim channel output; Galvanically isolated; May be wired as Class 1 or Class 2; Accepts 12-28 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
Controls and Indicators:
•NET ID: (2) 7-segment green LED digits and (2) miniature push buttons, sets Cresnet ID; Digits display output levels during local control
•SETUP: (1) Red LED and (1) recessed miniature push button, enables setup mode and touch-settable ID
•OVR: (1) Red LED and (1) miniature push button, enables override mode and saves presets
•PWR: (1) Green LED, indicates power status; Solid illumination indicates line power is applied to N1 and L1; Flashing indicates Cresnet power is supplied in absence of line power
•NET: (1) Yellow LED, indicates communication with control processor
•RESET: (1) Recessed miniature push botton, resets internal processor
•ON/OFF: (8) Red LEDs and (8) miniature push buttons, manually activates individual channels for dimming
Enclosure: The GLXP-DIMFLV8-LP module mounts in a GLEX enclosure with (2) integral mounting flanges
Humidity: 10% to 90% RH (noncondensing)
Heat Dissipation: 116 BTU/Hr

Dimmer Module 813203 kb - Data Sheet

Project List

Find a Dealer