2-channel 3500W Tour Grade Power Amplifier

Model: TG7

High-power performance for top-level tours
Rugged, lightweight package
Grounded bridge class-h design
Switch-mode power supply
Microprocessor-controlled

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The TG-7 Tour Grade amplifier has a microprocessor controlled operation management system that provides useful features such as compound thermal management (preventing the unit from switching off in excessive thermal environment), automatic mains voltage detection and a circuit breaker control that allows the TG-7 to operate on a 30A (120V) respect. or 16A (230V) circuit breaker with normal music signal.

High-power performance for top-level tours
Rugged, lightweight package
Grounded bridge class-h design
Switch-mode power supply
Microprocessor-controlled
Front lcd panel for operation-mode setup and monitoring
Slot for optional rcm-26 iris-net-compatible dsp and control module
11-level protection package

Amplifier Type - Power Amplifier
Dante Enabled - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 5 C
Maximum Frequency Response (Bandwidth): 30 kHz
Maximum Frequency Response (Bandwidth): 30000 Hz
Minimum Frequency Response (Bandwidth): 10 Hz
Minimum Frequency Response (Bandwidth): 0.01 kHz
Number of Channels: 2
Number of Watts Per Channel: 3500 Watt
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 1450 Watt
Depth: 512 mm
Height: 88.10 mm
Width: 483 mm
Product Weight: 14.50 kg
Signal to Noise Ratio: 111 dB
Total Harmonic Distortion + Noise (THD+N): 0.05 %
A/D Conversion: 24 Bit linear, Sigma-Delta, 128 times oversampling
Amplifier Gain: 41.5/35/32 dB
Analog Inputs: Yes
CAN Bus Interface: 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control)
Continuous Rated Power (1 kHz, THD 1%) 2-ohm: 3500 Watts
Continuous Rated Power (1 kHz, THD 1%) 4-ohm: 2500 Watts
Continuous Rated Power (1 kHz, THD 1%) 8-ohm: 1500 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4-ohm: 2100 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8-ohm: 1050 Watts
Control Protocol: CAN Bus
D/A Conversion: 24 Bit, Sigma-Delta, 128 times over-sampling
Data Format: 24 Bit linear A/D and D/A conversion, 48 Bit processing
Digital Inputs: Optional with RCM-26
DIM 30: 0.02 %
FIR-Drive: Optional with RCM-26
GPIO Control Ports: 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND)
Impedance: 2/4/8 ohm
Input Impedance (Balanced): 20 kohm
Input Sensitivity: 0/+6/+9
Intermodulation Distortion (SMPTE): 0.05 %
Internal Processing: 2 DSPs (150 MHz, 300 MIPS)
Maximum Bridged Output 4-ohm: 7000 Watts
Maximum Bridged Output 8-ohm: 5000 Watts
Network Control (IRIS-Net): Optional with RCM-26
Sample Rate: 48 kHz
Sample Rate Conversion (SRC): 32kHz - 192kHz, internal sample-rate- converter
Slew Rate: 35 V/uS
Topology: Class-H grounded bridge

Amplifier 504556 kb - Brochure

Project List

Amplifier 186916 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor