Lighting Control Systems : Related Lighting Control Products : Lutron Electronics Company, Inc. - GT-5ANSM-WH

Multi-location Switch for LED/Incandescent/Halogen Lighting, White

Model: GT-5ANSM-WH

5 A Incandescent/Halogen/Fluorescent/LED/MLV/ELV/HID/Relay
3 A Fan
1/10 HP Motor
Neutral connection required
Multi-location Switch

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

An LED touch bar allows users to adjust lights to a desired level. Patented C.L technology provides exceptional dimming performance for dimmable LEDs.

5 A Incandescent/Halogen/Fluorescent/LED/MLV/ELV/HID/Relay
3 A Fan
1/10 HP Motor
Neutral connection required
Multi-location Switch
Controls include dimmers, switches, and companion device
Simple touch control
Distinctive architectural aesthetic
Softly lit white LEDs indicate light level and coordinate with any decor
Models available with or without Clear ConnectR RF wireless technology
Advanced microprocessor dimming technology for control of dimmable LED lamps
Installs in single-pole or multi-location applications. Companion devices are available for multi-location control with dimmers.
Use LutronR GRAFIK TTM wallplates. All controls come with white wallplate. Other colors and finishes are sold separately
LutronR GRAFIK TTM wallplates snap on with no visible means of attachment

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Certifications: UL, FCC
AC Voltage: 120 Volts
Colour: White
Warranty (Length/Type): 1 Year Limited
Typical Power Consumption:
- Dimmer / Switch: 0.1 W
- Test conditions: load is off
Environment:
- Relative humidity: 0% to 90% non-condensing
- For indoor use only.
Performance:
- Power failure memory: should power be interrupted, the control will return to its previous state when power is restored.
- Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
- Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
- Dimmers / Switches communicate with PicoR wireless controls or Radio Powr SavrT sensors through Radio Frequency (RF) and must be located within 30 ft (9 m) of these devices (GTJ models only). Companion devices do not have Clear ConnectR RF technology and are not required to be within a specific range of these devices.
- Uses conventional 3-way and 4-way wiring.
- Total multi-location wire length (blue wire) between all units must not exceed 150 ft (45 m).
Application Requirements:
- When using LEDs, only Lutron® approved lamps marked or rated as Dimmable can be used.
- If using LED bulbs, they must be Lutron compatible! For compatibility and performance information, visit our website at www.lutron.com/led, which is constantly being updated.
Mounting:
- Requires a U.S. wallbox. 3-1/2 in (89 mm) deep recommended, 2-1/4 in (57 mm) deep minimum.

GT-AD-WH - Companion Device for Dimmer/Switch

Dimmer/Switch 5000 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

AV Bridge - Wireless Control Integration Module, International

by Crestron Electronics, Inc.

Enclosure for DIN Rail Devices, 3 DIN Rails, 18 Units Wide

by Crestron Electronics, Inc.

Automation Enclosure, 4 modules high x 2 modules wide - International Version

by Crestron Electronics, Inc.