The IN505, DisplayPort Input Board Assembly is a Series 500 input board compatible with all Series 500 enclosures, such as the PS550. This board is used to connect audio-visual source devices using the DisplayPort Apple/Mac standard. Installation is quick and painless. UNPLUG THE POWER CORD ATTACHED TO THE ENCLOSURE. Simply remove the single mounting screw that holds the IN500 Future Expansion Plate or other card where you plan to install the IN505. After removing the old plate, insert the new IN505 assembly. Replace the screw and reattach the power cord. The system automatically recognizes the new board installed so no further activity is required. However, in some cases, it may be necessary to adjust the audio trim to level the input amplitude to a nominal level. See the Installation Manual for more details regarding audio adjustments.
- DisplayPort Digital Video, Apple/Mac Format
- 6.75 Gbps (2.25 Gbps per color), 225 MHz
- HDTV Resolutions up to 1080p @ 60 Hz or 720p/1080i at 120 Hz, 12-bit color
- PC Resolutions up to WUXGA (1920 X 1200)
- HDCP Supported on HDMI Output Connector
- EDID: Passthru or Table Lookup, selectable
- Equalization: Automatic, up to 20m AWG26 at 2.25 Gbit/s, 30m AWG24 at 1.5 Gbit/s
- Indicators: 1 LED (Red = Power, Green = Video Signal Present on Input)
