2-channel UHF Synthesized Wireless Intercom Base Station with A4M Headset Connector

Series: RadioCom BTR

Model: BTR-800

2-channel of intercom audio
Backlit base station LCD allows the user to easily monitor the beltpacks status
Table or rackmountable
Beltpack units contained in weather and shock resistant die cast magnesium case
ClearScan function automatically finds the best channels on which to operate

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

2-channel UHF synthesized wireless intercom base station is designed to offer the ultimate reliable, high-performance, high fidelity full-duplex communications. 2 audio channel operations, permitting the beltpack operator to choose between two separate audio channels of communications, with the base station tracking the beltpack selection. This allows the user the flexibility to create a party line and a private line within the same beltpack.

2-channel of intercom audio
Backlit base station LCD allows the user to easily monitor the beltpacks status
Table or rackmountable
Beltpack units contained in weather and shock resistant die cast magnesium case
ClearScan function automatically finds the best channels on which to operate
Compatible with Audiocom, RTS, Clear-Com and other wired intercom types
Convenient IEC power connector on the base station
Frequency-agile base station and beltpacks
Adjustable auxiliary input and output
712-channel two synthesized transmitter
712-channel dual conversion superheterodyne, four Independent synthesized IFs, FM receiver
FM modulation
1/2 wave TNC male type transmitting and receiving antenna
Full duplex (Simultaneous Talk and Listen) operation
SA (Stage-Announce) beltpack control
WTA beltpack control
4-pin male (A4M) headset jack

Wireless - Yes

Depth: 355.60 mm
Height: 43.69 mm
Power Requirements: 100 to 240Vac, 50/60 Hz, IEC receptacle
Width: 482.60 mm
Shipping Weight: 5.43 kg
Form Factor: Rackmount
Battery Life: 12 hours
Battery Type: Standard Alkaline Batteries
RF Frequency Range: 470 to 608, 614 to 740 MHz (In 18MHz TX and RX bands)
Microphone Input Sensitivity: 9 mV
Function: Base Station
Receiver RF Sensitivity: < 0.8 microvolt (For 12dB SINAD)
Receiver Image Rejection: 70 dB
Transmit Power: 100 mW
Transmitter Deviation: 40 kHz
Transmitter RF Frequency Stability: 0.005 %
Receiver IF Selectivity: 3 dB (At 230kHz)
Receiver Squelch Quieting: 90 dB
User Capacity: 4
Product Weight: 3.24 kg
Colour: Black
Wireless: Yes
Minimum Frequency Response (Bandwidth): 300 Hz
Minimum Frequency Response (Bandwidth): 0.30 kHz
Maximum Frequency Response (Bandwidth): 8000 Hz
Maximum Frequency Response (Bandwidth): 8 kHz
Number of Channels: 2
Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): -20 C

Base Station 981 kb - Data Sheet

Project List