SmartPro 230V 1kVA 750W Medical-Grade Line-Interactive Tower UPS with 6 Outlets, Full Isolation, Expandable Runtime
Series: Smartpro
Model: SMX1200XLHG
Ideal UPS protection for applications in medical patient-care areas where CE/IEC 60601-1 listed medical electrical equipment is required
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
Provides connected equipment with continuous power during short and long duration loss of commercial power
Expandable runtime is available with the addition of one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible)
Line-interactive voltage regulation corrects brownouts and overvoltages from 155 to 274V back to usable 230V output levels, without using battery power
1kVA medical grade line interactive tower 230V UPS with USB and serial ports. Built-in line-interactive voltage regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability. Tested to CE/IEC 60601-1 standard as medical electrical equipment. Built-in isolation transformer with Faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge.
Ideal UPS protection for applications in medical patient-care areas where CE/IEC 60601-1 listed medical electrical equipment is required
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
Provides connected equipment with continuous power during short and long duration loss of commercial power
Expandable runtime is available with the addition of one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible)
Line-interactive voltage regulation corrects brownouts and overvoltages from 155 to 274V back to usable 230V output levels, without using battery power
Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
Resistant to electrostatic discharge
Supports loads up to 1000VA/750W
6 protected outlets, 6-inch dongle with IEC C14 inlet
USB and DB9 communication ports
PowerAlert unattended shutdown software and complete cabling included
Complete surge protection, line isolation and EMI/RFI noise filtering
5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload, battery low/replace
Battery replacement door and back panel grounding lug
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
40 C
Operating Temperature (Minimum):
0 C
Cord Length (in/mm):
1828.80 mm
Estimated Runtime:
11 minutes
Output volt amp capacity:
1000 VA
Output Watt Capacity:
750 W
Nominal Output Voltage (Supported):
220/230/240 V
Frequency Compatibility:
50/60 Hz (auto-selectable)
Built-in UPS output receptacles:
6 C13 outlets
Rated input current (at maximum load):
5A
Nominal Input Voltage (Supported):
230 VAC
Input Connection Type:
C14 inlet
Battery Full Load Runtime:
11 minutes (750W)
Battery Half Load Runtime:
27.5 minutes (375W)
DC Battery System Voltage:
36 VDC
Primary Form Factor:
Tower
Shipping Dimensions:
18.5 x 12.2 x 13.4 inches
UPS housing material:
PVC
Cooling Method:
Fan
RoHS Compliant:
yes
Package Includes:
SMX1200XLHG medical grade tower UPS system, PowerAlert software/cable, warranty information and instruction manual