D-Series Driver 10A 120V US

Model: D10-1US

More Product Information Below

Compare

Project List

Product Info

Tech Specs

The D Series represents the global benchmark for digital audio induction loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available. The D Series range consists of 4 class ‘D’ drivers (3 dual loop output and 1 single output models); meaning a 60%+ increase in energy efficiency over existing solutions. Drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts, and with Loopworks Measure LoopLink for easy test and commissioning.

The D10 features 10 Amps per loop output respectively plus ample voltage headroom, making it the most flexible solution on the market, suitable for a huge range of applications.

Wireless Receiver Transmission - Loop

Operating Temperature (Maximum): 35 C
Operating Temperature (Minimum): 0 C
Maximum Frequency Response (Bandwidth): 6.50 kHz
Maximum Frequency Response (Bandwidth): 6500 Hz
Minimum Frequency Response (Bandwidth): 80 Hz
Minimum Frequency Response (Bandwidth): 0.08 kHz
Depth: 290 mm
Height: 44 mm
Width: 430 mm
Product Weight: 4.37 kg
Sustainability Rating: IP20
Power Input: 50/80/160W 230V AC nominal, 45-65Hz [120V option], Power switch on front panel
Input 1 and 2 Programmable Microphone / Line: XLR balanced input with programmable switchable between microphone and line via panel menu Microphone specification; 200 - 600ohms, sensitivity -64dBu, Selectable 12V phantom power on microphone only, Line sensitivity; -39dBu Input 2 can also be used for AES3 Digital Audio Signals
Slave In: 6.35mm jack socket for linking more than one amplifier. Inserting plug disables other inputs
Loop output drive voltage: 33.9Vrms (45Vpk) at maximum output current per channel
Loop Output Drive Current: CD7-X: 7Arms (10Apk) up to 60 seconds continuous 1kHz sine wave, peak [gt]10A per channel; Cont. pink noise 3.3Arms short term peaks [gt]10A per ch, D10-x: 10Arms (14.1Apk) up to 60 seconds continuous 1kHz sine wave, peak [gt]14.1A per channel; Cont. pink noise 4.7Arms short term peaks [gt]14.1A per ch, D14-x: 14Arms (19.8Apk) up to 60 seconds continuous 1kHz sine wave, peak [gt]19.8A per channel; Cont. pink noise 6.6Arms short term peaks [gt]20A per ch.; Level controlled via front panel menu or network; Drive current indicated on two 4-LED displays in 6dB increments
Slave Out: 6.35mm jack socket to connect to other slave amplifiers
Loop Connectors: Neutrik NL2 Speakons (supplied) for each output
Loop Monitor: Provides access to monitor actual loop current via a 3.5mm stereo headphone connector on front panel; Channel A on left, channel B on right
DC Output: Resettable, fuse protected 12V 0.1A. Operation can be configured via menu
Distortion: THD+N [lt]0.2%1kHz sine at 2.33Arms
Automatic Gain Control: The AGC is optimised for speech. Dynamic range [gt]36dB
Metal Loss Correction: Corrects system frequency response due to metal structures in a building. Gain constant at 1kHz, adjustable gain slope from 0 to 4dB per octave in 0.25dB increments. Custom 2 slope MLC allows different slopes and transition frequency to be set via the menu, This does not compensate for signal loss from metal structures which can be significant
Phase Shift: User selectable at 0 or 90 Degree between outputs
Fault Monitoring: Indicators on the front panel; Clipping - delivering over the rated voltage (per channel); Error - Check status in menu, Temperature and loop errors reported via the status menu
Cooling: Variable speed fan cooled. Front inlet, rear exhaust
Mounting: Freestanding; 1U 19 inch rack mount (brackets included)

Find a Dealer

Find a Distributor