TXn DSP power amplifier models incorporate sophisticated 24-bit ADDA 96kHz DSP engine that affords an extraordinary range of control and processing capabilities. In addition to basic amplifier control and status monitoring, there is enough DSP power built in to provide extensive speaker processing capabilities that will make external processors unnecessary in most applications. The TXn provides separate input and output processing. The onboard DSP parameters and functions can be accessed directly through LCD and button interface provided on front panel of the amplifier, or via Yamaha's amplifier control software running on computer connected via Ethernet. TXn series amplifiers features Yamaha mini-YGDAI standard card slot that comes fitted with an AES/EBU I/O card for digital input and throughput. The amplifier's balanced analog inputs and throughputs are permanently installed on rear panel. The analog and digital inputs can be used independently or signals can be applied to both and mixed or switched automatically for emergency announcements, for example. The original AES/EBU I/O card can be replaced with compatible Yamaha mini-YGDAI cards that provide other digital or analog input/output formats, or with network cards that allow full compatibility with CobraNet or EtherSound audio networks.
TXn series includes three models TX4n, TX5n nad TX6n
Stable 2 ohms drive capability for line array speaker systems
Yamaha DSP technology provides extensive monitoring, control, input/speaker processing, and protection functions built in
MY card slot makes it easy to match the amplifier’s I/O configuration to the system analog or digital
Analog and digital inputs can be used independently, or signals can be applied to both and mixed or switched automatically for redundancy
Advanced remote monitoring, control, and system management capabilities via Yamaha's dedicated software
Legendary Yamaha quality control for consistently superior sonic quality and reliability
Dual mono configuration with independent power supplies for each channel
Original Yamaha EEEngine amp drive technology achieves efficiency that matches class D amplifiers
Exhaustive vibration-reduction measures have resulted in unprecedented sound quality
Durable exterior, large cooling fans and fan guards, easily replaceable filters, and other reliability features deliver dependability even under demanding tour conditions
A variety of I/O terminals, removable handles, and other features for maximum installation and handling versatility
Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier
Spec Sheet available - Yes
Technology:
EEEngine amp drive
Total Harmonic Distortion + Noise (THD+N):
0.20 %
Total Harmonic Distortion:
less than 0.2% (1kHz, halfpower)
Intermoduration Distortion:
less than 0.25% (60Hz:7kHz=4:1, halfpower)
Standby Power Consumption:
20 W
Idle power consumption:
100 W
Frequency Response:
maximum 0dB, typical 0dB, minimum -0.5dB, f=10Hz to 20Hz (8 ohms, Po=1W, HPF=OFF)
Damping Factor:
>800 (8 ohms, f=1kHz)
Voltage Gain:
32/26 dB
Maximum Input Voltage:
+24 dBu
Balanced Input Impedance:
20 kiloohms
Unbalanced Input Impedance:
10 kiloohms
Cooling:
dual variable-speed fan
Power Requirements:
100/120V (30A twist lock connector) or 220 to 240V, 50/60Hz