Signal Processing Systems : AV Input / Output Boards & Cards : AJA Video - KONA 3G

Video and Audio Desktop I/O Card

Model: KONA 3G

The power to perform
Futureproof for 4K workflows
3D ready and able
Powerful connectivity
Integrated AJA hardware conversion

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

KONA 3G supports Dual Link 4:4:4 HD-SDI, with full-bandwidth 4:4:4 RGB at 10-bits for 1080i, 1080p, 1080PsF and 720p formats. KONA 3G can also convert between 4:4:4 and 4:2:2 formats for single link HD-SDI monitoring and output.

The power to perform
Futureproof for 4K workflows
3D ready and able
Powerful connectivity
Integrated AJA hardware conversion
Internal SD/HD hardware downstream keyer
Extensive software support
Extend your Connectivity with K3G-Box

Input/Output Board/Card Type - Audio
Input/Output Board/Card Type - Video

Video Formats: 525i 29.97;625i 25;720P 50, 59.94, 60;1080i 25, 29.97, 30;1080PsF 23.98, 24, 25, 29.97, 30;1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60;2048 x 1080P 23.98, 24, 25, 29.97, 30, 50 and 60;2048 x 1080PsF 23.98, 24, 25;2048 x 1556p 15, 14.98;2048 x 1556PsF 15, 23.98, 24;3840x2160P 23.98, 24, 25;4096x2160P 23.98, 24, 25;3840x2160PsF 23.98, 24, 25;4096x2160PsF 23.98, 24, 25
Software-dependent Formats: These formats are dependent on specific software functionality and are not normal 'over-the-wire' formats.;525i 23.98;720P 23.98, 24 , 25 , 29.97, 30
Video Input Digital: 3G/SD/HD SDI, SMPTE-259/292/296/424, 8- or 10-bits;Single Link 4:2:2 or 4:4:4 (1 x BNC);Dual Link HD 4:4:4 (2 x BNC);2K HSDL (High Speed Data Link) 4:4:4, (2 x BNC);2K HSDL (High Speed Data Link) 4:4:4, (2 x BNC);4K/QuadHD 4:4:4 (4 x BNC);1D LUT Support (Mac and PC)
Video Output Digital: 3G/SD/HD SDI, SMPTE-259/292/296/424;Single Link 4:2:2 or 4:4:4 (1 x BNC);Dual Link HD 4:4:4, (2 x BNC);2K HSDL (High Speed Data Link) 4:4:4, (2 x BNC);4K/QuadHD 4:4:4 (4 x BNC);HDMI v1.4, 30/36 bits/pixel, RGB or YUV, 2.25Gbps, SD, HD, 1080p-50/60
Video Output Analog:: Composite/S-Video (Y/C) (1 x BNC/2x BNC+adapter);NTSC, NTSCJ, PAL;12-bit D/A, 8x oversampling;+/- .2 dB to 5.0 MHz Y Frequency Response;+/- .2 dB to 1 MHz C Frequency Response;.5% 2T pulse response;<1% Diff Phase;<1% Diff Gain;Component (3 x BNC);HD: YPbPr, RGB;SD: YPbPr, RGB (component mode);SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB;12-bit D/A, 8x oversampling;+/- .2 dB to 5.5 MHz Y Frequency Response;+/- .2 dB to 2.5 MHz C Frequency Response;.5% 2T pulse response;<1 ns Y/C delay inequity
Downstream Keyer:: Supports graphics with alpha channel over video, matte or framebuffer, or framebuffer content over incoming video or matte
Audio Input Digital: 16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous;8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (via 4 x BNC on breakout cable);16-channel, 16- or 24-bit AES/EBU audio, 48 sample rate, Synchronous (via 8 x BNC on optional K3G-Box)
Audio Output Digital: 16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous;8-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous;8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (via 4 x BNC on breakout cable);16-channel, 16- or 24-bit AES/EBU audio, 48 sample rate, Synchronous (via 8 x BNC on optional K3G-Box)
Audio Output Analog: 2-channel unbalanced output (via 2 x RCA jacks on optional K3G-Box)
Up-Conversion: Hardware 10-bit;Anamorphic: full-screen;Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars;Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars;Zoom Letterbox: results in image zoomed to fill full screen;Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting can introduce a small aspect ratio change
Down-Conversion: Hardware 10-bit;Anamorphic: full-screen;Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved;Crop: image is cropped to fit new screen size
Cross-Conversion: Hardware 10-bit;1080i to 720P;720P to 1080i;720P to 1080PsF
SD to SD Aspect Ratio Conversion: Letterbox: This transforms SD anamorphic material to a letterboxed image.;H Crop: Will produce a horizontally stretched effect on the image; transforms anamorphic SD to full frame;SD Pillarbox: Will produce an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center;V Crop: Will transform SD letterbox material to an anamorphic image.
Timecode: LTC timecode input and output (via 1 x BNC each)
Reference Input: Analog Color Black (1V) or Composite Sync (2 or 4V);Looping;75 ohm on optional K3G-Box, terminated on supplied breakout cable
Machine Control: RS-422, Sony 9-pin protocol (via breakout cable or optional K3G-Box)

KONA_Brochure 7582 kb - Brochure

Project List

K3GBOX-CBL-5M
5m Breakout Cable for KONA 3G