Control Systems : Related Control Systems Products : AMX - NXB-KNX

NetLinx Communications Gateway

Model: NXB-KNX

Part #: FG2031-01

Index filtering tables for portability between systems
Zero Configuration support for immediate system recognition
Two-Way Control
Extended data-point type allows time, date, etc. to be captured and used in RMS
64 MB RAM / 256 MB FLASH

More Product Information Below

Compare

Project List

Product Info

Tech Specs

OVERVIEW
Now Enables AMX Control Of KNX Devices

The NetLinx NXB-KNX Communications Gateway allows NetLinx Integrated Controllers the ability to seamlessly control, integrate and communicate with homes and buildings that utilize the KNX communication protocol. KNX is the world's first open, royalty free, and platform independent standard for home and commercial building control.

COMMON APPLICATION

Ideal for building control, ranging from lighting and shade control to various security systems, HVAC, water control, energy management, metering as well as audio and more.

Index filtering tables for portability between systems
Zero Configuration support for immediate system recognition
Two-Way Control
Extended data-point type allows time, date, etc. to be captured and used in RMS
64 MB RAM / 256 MB FLASH
Ethernet Interface to AMX control equipment

ROHS Compliant - Yes
Systems Controlled - Other
Warranty - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Depth: 104 mm
Height: 42.10 mm
Width: 141 mm
Product Weight: 0.66 kg
Certifications: CE, FCC
Warranty (Length/Type): 3 Years Limited
Dimensions (HWD):
- 1 5/8" x 5 1/2" x 4 1/8" (4.21 cm x 14.1 cm x 10.4 cm)
- RU: 1
FRONT PANEL COMPONENTS:
- Status LED (green): Blinks once a second to indicate that the unit has powered up. Any state other than blinking once a second indicates the unit is either not powered, or has not completed boot up
- KNX LED (green): Solid on indicates power is on and the unit is connected to KNX bus
- Output LED (red): Lights to indicate traffic from the NXB-KNX to the KNX bus
- Input LED (yellow): Lights to indicate traffic from the KNX bus to the NXB-KNX
Rear Panel Connectors:
- KNX 2-pin captive-wire connector
- Ethernet Port - 10/100 Ethernet with PoE. LEDs show communication activity, connection status, speeds, and mode information:
  - - SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps
  - - L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets
Power:
- PoE powered - no local Power Supply needed
- IEEE 802.3af Compliant
MEMORY:
- 64 MB of RAM
- 256 MB of FLASH
Environmental:
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Relative Humidity: 5% to 85% non-condensing
- Intended for indoor use only
Included Accessories:
- Rubber feet
- Green 2-Pin 5mm Phoenix connector with captive screws

Find a Dealer

Find a Distributor

Suggested Products

Emergency/Panic Button

by Network Technologies Inc. (NTI)

Intrinsically Safe Pressure Sensor Transmitter, 0 to 3000 psig

by Network Technologies Inc. (NTI)

Outdoor Infrared Motion Sensor

by Network Technologies Inc. (NTI)