Lighting Control Systems : Dimmers & Dimmer Systems : AMX - RE-DM6 / 240

Radia Eclipse 6 Dimmer Module

Model: RE-DM6 / 240

Part #: FG706-04

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Other Options

OVERVIEW
The RADIA Eclipse 6-Channel Integrated Dimmer Module (120 VAC: FG706-03; 240 VAC: FG706-04) controls up to six circuits with six 1200-watt onboard dimmers. The RE-DM6 is designed for use with the RDA series of enclosures, in an AMX Lighting modular digital dimming system. The RE-DM6 is controlled by AxLink or by dry (contact) closures.

COMMON APPLICATION
A good choice for larger businesses and residences needing support of up to 6 Radia traditional dimmers.

Warranty - Yes

Product Weight: 2.04 kg
Warranty (Length/Type): 3 Years Limited
Certifications: CE, FCC, UL
Wattage (max capacity): 1200 Watt
Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Dimensions (HWD): 5 3/4" x 10" (14.6 cm x 25.4 cm)
LINE INPUT:
- 120, 240 VAC, single phase, 2W+G, 50/60 Hz, 2400 W, one feed
- 120, 120/240, 240 VAC, single phase, 3W+G, 50/60 Hz, 4800 W, dual feed
- Line input #1 goes to dimmer 1 and 3; line input #2 goes to dimmer 2, 4 and 6
Output:
- 1200 W max. per channel @120, 240 VAC
- 2400 W max. total, all four channels on with single 2400 W feed
- 4800 W max. total, all four channels on with dual 2400 W feeds
- All electrical ratings are for continuous duty
WIRE RATING: Use only copper wires rated at 75°C (167°F) min
TORQUE TERMINALS: To 20 in-lbs (2.3 N/M)
MAXIMUM WIRE SIZE: 10 AWG (4 mm²)
AXLINK PORT: 4-pin 3.5 mm black captive wire connector. AxLink communication signaling with 12 VDC power in
AUX POWER: 2-pin 3.5 mm green captive wire connector. This is a 12 VDC power input that supplies additional power to the Radia PCB and connected Radia modules
DRY CONTACTS:
- Emergency fire alarm relay connection - Closed relay activates preset 126. Other control is locked out until relay opens. Supports daisy chaining of up to 20 dimmers for this connection, with a maximum current requirement of 200 mA when daisy-chained
- Failsafe connection - Works with a toggle switch - opening the switch triggers preset 128, closing the switch triggers preset 127. Supports daisy chaining of up to 20 dimmers for this connection with a maximum current requirement of 200 mA when daisy-chained
IDLE CURRENT DRAW: 75 mA @ 120 VAC, 50 mA @ 240 VAC, 100 mA @ 13.5 VDC
Environmental:
- Heat Dissipation (Typical): 300 BTU/hr single feed (2400 W); 600 BTU/hr dual feed (4800 W)
Included Accessories:
- 2 4-pin 3.5mm captive wire connector (41-5047)
- 4 #8-32x1/2" F-point mounting screws

Dimmer Module 3159 kb - Other

Project List

Dimmer Module 296 kb - Other

Project List

Dimmer Module 268 kb - Other

Project List

Radia Eclipse 6 Dimmer Module

by AMX

Model: RE-DM6

Find a Dealer

Find a Distributor

Suggested Products

120V Wireless Lamp Dimmer with Lamp Switch Control Input, White

by Crestron Electronics, Inc.

Cameo In-Wall Universal Phase Dimmer, 120 VAC, Gray Smooth [Available 7/31/2020]

by Crestron Electronics, Inc.

0-10V 120V In-wall Dimmer, Black Textured

by Crestron Electronics, Inc.