Wireless Signal Processing : Related Wireless Signal Processing Products : Audio-Technica Europe - ATW-49SP

Active Antenna Splitter Kit

Model: ATW-49SP

Each kit includes two one-input, two-output Active Antenna Splitters four 18” BNC-to-BNC RG 58 coaxial antenna cables, two BNC-to-BNC barrel adapters
One set of Active Antenna Splitters enables one set of antennas to feed wireless receivers of different frequency bands
Provides unity gain
Designed for use with Audio-Technica 4000 and 5000 Series UHF wireless receivers and ATW-A49 LPDA antennas
Also suitable for use with a variety of other receivers and antennas

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ATW-49SP includes two active antenna splitters designed for use with Audio-Technica 4000 and 5000 Series UHF wireless receivers and ATW-A49 LPDA antennas. Each Active Antenna Splitter is a broadband device (frequency range from 440 to 900 MHz) that splits an incoming RF signal into two identical outgoing RF signals. One set of Active Antenna Splitters enables one set of antennas to feed wireless receivers of different frequency bands.

Each kit includes two one-input, two-output Active Antenna Splitters four 18” BNC-to-BNC RG 58 coaxial antenna cables, two BNC-to-BNC barrel adapters
One set of Active Antenna Splitters enables one set of antennas to feed wireless receivers of different frequency bands
Provides unity gain
Designed for use with Audio-Technica 4000 and 5000 Series UHF wireless receivers and ATW-A49 LPDA antennas
Also suitable for use with a variety of other receivers and antennas

Warranty - Yes
Spec Sheet available - Yes

Impedance: 50 ohm
Warranty (Length/Type): 2 Years Limited
Current Draw: 0.03 Amps
DC Voltage: 12 Volts
Depth: 47 mm
Height: 23 mm
Width: 61 mm
Product Weight: 0.05 kg

ATW-49SP Submittal Sheet 133 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

IR Kit & Remote for PAV140

by Vanco International

ew 500 G4-KK205-GW1 - Wireless vocal set. Includes (1) SKM 500 G4 Handheld transmitter, (1) Neumann KK 205 capsule , (1) EM 300-500 G4 rackmount receiver, (1) NT 2-3 power supply, (1) GA3 rack kit & (1) mic clip, frequency range: GW1 (558–608 MHz)

by Sennheiser

Handheld Set, 1 SKM 300 G4-S Handheld with Mute Switch, 1 MME 865-1 Capsule (Supercardioid, Condenser), 1 EM 300-500 Rackmout receiver, 1 GA3 Rack kit and 1 Mic Clip

by Sennheiser