Microphones : Headworn Microphones : Audio-Technica U.S., Inc. - BP893C

MicroEarset Omnidirectional Condenser Headworn Microphone with 55" Unterminated Cable

Model: BP893C

Outstanding clarity and intelligibility
Lightweight and ergonomic design
Extremely unobtrusive, 1-inch flexible boom
Secure over-the-ear placement
Extended frequency response for natural vocal reproduction

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

MicroEarset omnidirectional condenser headworn microphone with 55" unterminated cable. BP893 omnidirectional condenser headworn microphone, less power module. 1.4m (55") permanently attached miniature cable, unterminated. Includes AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard and a carrying case.

Outstanding clarity and intelligibility
Lightweight and ergonomic design
Extremely unobtrusive, 1-inch flexible boom
Secure over-the-ear placement
Extended frequency response for natural vocal reproduction
Fixed-charge back plate, permanently polarized condenser element
Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak body-pack wireless transmitters
UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Accessories furnished:
- BP893c:AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; carrying case
- BP893c-TH:AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; carrying case

Headset Mic Type - Condenser
Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Warranty - Yes
Spec Sheet available - Yes

AUDIO-TECHNICA CASE STYLE: M31
Cable: 1.4 m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
Dimensions:
Weight:
Voltage Range: 2.5 to 11 V (wireless only)
Current Consumption: 0.10 mA typical at 5V (wireless only)
Phantom Power Requirements: 11 to 52 V DC 2 mA typical (wired only)
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Low Frequency Roll-off: 80 Hz 18 dB/octave (wired only)
Warranty (Length/Type): 2 Years Limited End-User
Product Weight: 0 kg
Height: 8.10 mm
DC Voltage: 52 Volts
Current Draw: 0 Amps
Signal to Noise Ratio: 68 dB
Sensitivity: -34 dB
Maximum SPL (Sound Pressure Level): 114 dB
Impedance: 245 ohm
Dynamic Range: 88 dB
Certifications: FCC
Minimum Frequency Response (Bandwidth): 0.02 kHz
Minimum Frequency Response (Bandwidth): 20 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20,000 Hz
Cable Length: 140 cm
Cable Length: 1.40 m

Headworn Microphone 426 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Special Projects Headworn Condenser Vocal Microphone with TA4F Connector

by Electro Voice

Micro-headworn Condenser Microphone with TA4F Connector, Black

by Electro Voice

Omni 2-sided Low Profile Headworn Microphone with Telex TA4F Connector, Beige

by Electro Voice