- Locking HDMI connector prevents accidental cable disconnects
- CE, FCC, IC, RCM, and VCCI approvals
Send high-quality video and audio signals further, without replacing the copper cable, with this HDMI 2.0 Extender. In compliance with HDR and HDCP 2.2 standards, it supports 4 at 60 4:4:4 resolution, Dolby and DTS HD audio, and bi-directional IR control, in a low-profile box. Configure the ARC channel feed for a TV (with ARC support) or an auxiliary S/PDIF input port via an audio output DIP switch on the receiver. The extender uses proprietary one-way PoC technology to power the receiver from the transmitter. LEDs show power and signal status for established connections between devices.
With increased bandwidth up to 18-Gbps, you can extend signals over CATx cable up to 328-ft. while maintaining:
- Higher resolutions
- Higher frame rates
- Multiple full HD streams in the same pipe
- 21:9 aspect ratio
- HDCP 22 compliant
- HD signal transmission via a single CAT5e/CAT6 cable up to 100m (1080p) and 70m (4K at 60Hz YUV 4:4:4)
- HD signal transmission via a single CAT6A/7 cable up to 100m (1080p) and 100m (4K at 60Hz YUV 4:4:4)
- IR pass-through function allows you to control the source from the display location or control the display from the source location
- Use two RS232 control systems for serial communication by connecting to the devices via serial cables to control the source device or display
