Crestron Zum® Mesh Wireless J-Box Load Controllers (ZUMMESH-JBOX Series) can provide 20 A switching, 5 A or 16 A 0-10 V dimming, and 20 A plug load control. J-Box load controllers mount directly to a 4 in. square junction box. Zum Mesh wireless technology affords easy pair and play integration as part of a complete Zum commercial lighting system. Energy-saving options are available to enable daylighting, occupancy or vacancy sensing, HVAC system integration, and centralized monitoring and management.
Energy Efficiency
Occupancy sensor, vacancy sensor, and daylight sensor connectivity allow for significant energy savings. To reduce energy usage, lights will turn off automatically when the room is vacant and dim gradually according to the amount of natural daylight in the room.
Pair and Play Setup
Pair and play functionality in Zum load controllers allows for installation in a room along with Zum keypads, occupancy or vacancy sensors, and/or a daylight sensor. Set up the room with a few button taps and instantly control the room lights without any additional programming. Room setup can be accomplished via the Zum app if the room is equipped with a Zum Network Bridge (sold separately).
Optional Zum Network Bridge
Snap a Zum Network Bridge (ZUMMESH-NETBRIDGE, sold separately) onto a Zum Wireless J-Box Load Controller for centralized lighting management via a Zum Floor Hub and Zum Net Wireless Gateway. The Zum Network Bridge enables enhanced room setup using the Zum app.
Optional Contact Closure Output
Snap a Zum Contact Closure Output (ZUMMESH-CCO, sold separately) onto the Zum Wireless J-Box Load Controller for integration with an HVAC system or other relay-controlled equipment.
Zum Mesh Wireless Technology
Zum Mesh wireless technology provides peer-to-peer RF communications within a commercial space without the need for physical control wiring, hubs, or gateways. Nearly every Zum Mesh device acts as a routing node to relay wireless commands between Zum Mesh devices without disruption.
Adding Zum Mesh devices to a space increases the range and stability of the peer-to-peer mesh network by providing multiple redundant signal paths. Each Zum Mesh device auto-negotiates its RF channel to provide robust communication and is protected through AES 128-bit encryption.
Emergency Load Control
The ZUMMESH-JBOX-16A-LV-EM provides load control to meet UL 924 standards. The device functions like a standard J-box dimmer in normal conditions, where it can bind to keypads, make scene modifications, follow sensor control states, and perform other standard ZUMMESH-JBOX actions.
If power to a lighting system is lost, the device enters Emergency Mode for ninety minutes or until system power is restored, whichever comes first. In Emergency Mode, all connected loads are fully illuminated to allow for safe exit from the space.
