Signal Processing Systems : Distribution Amplifiers : RDL, Radio Design Labs - EZ-VM12

EZ-VM12 VGA/XGA Distribution Amplifier

Series:

Model: EZ-VM12

Input and Two Outputs on HD15 Female Connectors
Wide RGB Bandwidth > 360 MHz Loaded
High Resolution Compatibility VGA through QXGA
Reliable Full-Size Front-Panel Switch for ID Bit Selection
NORM ID BIT Connects LOCAL MONITOR and INPUT ID

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

The EZ-VM12 is a high-resolution computer video distribution amplifier with two outputs. The input has an associated front-panel BIT ID switch to assure compatibility with various computers. The two outputs are driven by video line amplifiers that provide flat, wideband response. The EZ-VM12 is used in houses of worship, restaurants, clubs, meeting rooms, class rooms, conference rooms, stores and in commercial A/V systems.

Input and Two Outputs on HD15 Female Connectors
Wide RGB Bandwidth > 360 MHz Loaded
High Resolution Compatibility VGA through QXGA
Reliable Full-Size Front-Panel Switch for ID Bit Selection
NORM ID BIT Connects LOCAL MONITOR and INPUT ID
DC RGB Coupling, Output Polarity & Offset Follow Input
HD15 Input Cable Included - 36¨, 91.44 cm long
Wide Bandwidth Linearity and Low Distortion Outperform Common Wideband Monitor Distribution Amplifiers
Ideal Weight and Size for Portable Computer Case

DA Video Output - Other
DA Video Input - VGA

input:: VGA - QXGA RGBHV or RGB with combined sync
Outputs (2):: LOCAL MONITOR (1, ID bit pass-thru to INPUT), MONITOR (1)
Gain:: Unity
Video Bandwidth:: > 360 MHz
Video impedance:: 75 Ω (Input and output)
Sync (HV) input:: 500 Ω TTL 0.7 V to 5 V p-p
Sync (HV) output:: 5V TTL
Sync (HV) Propogation delay:: < 4 nS typ.
Sync (HV) Rise Time:: < 4 nS typ.
Sync (combined):: Output follows input
Bit Control:: Switch-selectable (Pin 4, over-rides LOCAL MONITOR jack ID bit pass-thru)
24 Vdc power supply current:: 50 mA (idle), 60 mA (max.)
Case dimensions:: 5.75' (14.6 cm)W x 3' (7.6 cm)D
Mounting size:: 1/3 rack width
Number of Inputs: 1
Number of Outputs: 2
Depth: 76.20 mm
Width: 146.05 mm
Shipping Weight: 0.57 kg

EZ-VM12_INSTALLATION_MANUAL[2].pdf 566 kb - Instructions

Project List

EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width

EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products

EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width

EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6

EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products

EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths