Fibre Optic Systems : Fibre Optic Receivers & Transmitters : tvONE - 2620066-01

MultiView II DVI Video/Stereo Audio/Addressable Duplex Serial Transmitter

Series: Magenta

Model: 2620066-01

Compatible with MultiView receivers
Backwards compatible with Magenta’s Mondo Matrix switching platform
Converts 1080p DVI-D input to 1080p analog output
External configuration for DDC, sync and fourth pair modes
Local DVI-D Output

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Other Options

The MultiView II DVI Transmitter opens up even more possibilities for the switching, distribution and extension of video, audio and serial signals over UTP cable. Accepts a digital 1080p DVI-D video input. The MultiView II DVI-TX is fully compatible with Magenta’s Mondo Matrix UTP-based switching platform, enabling digital signals to be infused into both new and existing Mondo-based projects. This ability adds even more adaptability to a switching system that can be configured in increments of 16 inputs/outputs, from 16x16 all the way to 256x512. The MultiView II DVI-TX features a local DVI monitor-output and a series of external buttons to enable users to easily configure various DDC, sync and fourth-pair (on DVI-TX base model only) modes of operation.

Compatible with MultiView receivers
Backwards compatible with Magenta’s Mondo Matrix switching platform
Converts 1080p DVI-D input to 1080p analog output
External configuration for DDC, sync and fourth pair modes
Local DVI-D Output
Rack-mountable

Fiber Optic Signals Supported - Audio
Fiber Optic Signals Supported - DVI
Fiber Optic Signals Supported - HDMI
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Cable Required: Category 5, 5e, 6 cable, Shielded or unshielded twisted pair, low-skew
Video Support: DVI-D, and HDMI by using a connector adapter for unprotected content only
Resolution and Refresh Rate:
Interface Signal Details::
- Local-output Port Drive Impedance: Standard DVI interface specifications apply DDC/EDID is supported
- Audio Characteristics:
- Connectors::
- EDID/DDC: This module supports the EDID/DDC connections on the DVI-I connectors
- HDMI: It is usually possible to connect to HDMI devices (via a plug-adapter or cable-adapter) if the source device is providing un-protected content only (non-HDCP). Embedded HDMI audio is not supported
- HDCP: Not supported, even if a "HDMI-to-DVI" plug-adapter or cable-adapter is used
- CEC: Not supported, even if a "HDMI-to-DVI" plug-adapter or cable-adapter is used
- Storage Temperature: -4 to +140 °F (-20 to +60°C)
- Humidity: 80% RH, non-condensing
- Enclosure: Steel (0.040”/1mm thick), Powder-coat black paint, white epoxy graphics
- MTBF: 100,000 hours
- Certifications: CE, FCC Class A, IC Class / Class A, UL listed I.T.E Device
- Operating Temperature (Maximum): 40 C
- Operating Temperature (Minimum): 0 C
- Depth: 109.22 mm
- Height: 30.48 mm
- Width: 106.68 mm
- Product Weight: 0.45 kg
- Warranty (Length/Type): 3 Years
- DC Voltage: 5 Volts
- Active Power: 6 Watt
- Current Draw: 1.20 Amps

Transmitter 2080 kb - Data Sheet

Project List

MultiView-SAP with Stereo Audio/Addressable Duplex Serial Capability

by tvONE

Model: MultiView-SAP

Find a Dealer

Find a Distributor

Suggested Products

openGear 1-channel Single Mode LC Fiber to 3G-SDI Receiver with DashBoard Support

by AJA Video

SDI Miniature Optical Transmitter, 1310nm FP Laser

by Evertz

SDI with 2 Balanced AES Audio Fiber Transmitter, CWDM DFB laser

by Evertz